BioComp®
BioComp® ist eine innovative Biokunststoff-Produktfamilie, die einen hohen Anteil an erneuerbaren Rohstoffen enthält. BioComp® ist eine vollständig biologisch abbaubare und kompostierbare Compound-Familie mit hervorragenden mechanischen Eigenschaften. Sie wurde für Blasfolien-, Plattenextrusions-/Tiefzieh- und Spritzgussanwendungen entwickelt. Kann problemlos in konventionellen Extrusionsanlagen und Spritzgussmaschinen verarbeitet werden.Name | MFI ISO 1133 | Tensile stress at break MD ISO 527-3 | Tensile elong. at break MD ISO 527-3 | Ok Compost Industrial | Ok Compost Home | European Bioplastic Seedling | BPI Compostable | DIN Certco Home | DIN Certco Industrial | CSI High Perf. Biopolymer | |
---|---|---|---|---|---|---|---|---|---|---|---|
BioComp® BF 01HP | 2,5 | 20 | 450 | - | |||||||
BioComp® BF 6535 BB | 1,0-3,0 | 17-18 | 400-500 | - | - | - | - | - | |||
BioComp® BF 7210 | 3,0-5,0 | 22-23 | 270-360 | - | - | - | |||||
BioComp® BF 7210 (EE) | 2,0 | 20 | 270 | - | - | - | - | - | - | ||
BioComp® BF 7210S | 3,0-4,5 | 15-19 | 455 | - | |||||||
BioComp® BF 8515 | 3,5-5,5 | 20-28 | 150-300 | - | - | - | - | - | - | ||
BioComp® PAPER03 | 4,0 | 20 | 2 | - | - | - | - | - | - | ||
BioComp® CF04 | 1,5 | 65 | 3 | - | - | - | - | - | - | ||
BioComp® FLEX RAW05 | 5,5 | 30 | 550 | - | - | - | - | - |
Name | Density ISO 1183 | Calcium Carbonate Content Calcium (%) | Ok Compost Industrial | Ok Compost Home | |
---|---|---|---|---|---|
BioComp® Microfiller XP-Bio | 1,9 | 70 | - |
Name | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | HDT ISO 75-1 | Ok Compost Industrial | |
---|---|---|---|---|---|---|
BioComp® IM 2368 | 25 | 7500 | 3 | 50 | ||
BioComp® IM 95 | 34 | 6960 | 2,7 | 59 | ||
BioComp® IM 95CP | 10 | 1900 | 3 | 95 | ||
BioComp® IM 95HD | 22 | 4040 | 3 | 95 | ||
BioComp® IM CFLEX | 5 | 3260 | 2,7 | 87 |
Sertene® PP
Recyceltes Polypropylen-Homopolymer und -Copolymer für Spritzguss, Extrusion und Tiefziehen.Name | Polymer | Density at 23°C ASTM D792 | MFI ISO 1133 | Izod Notched ISO 180/1° | |
---|---|---|---|---|---|
Sertene® PP Z200C | Polypropylene in pellet form | 0,92 g/cm3 | 25 g/10' | 4,5 KJ/m2 | |
Sertene® PP X200C | Polypropylene in pellet form | 0,92 g/cm3 | 10 g/10' | 5,0 KJ/m2 |
Isoplen®
Homopolymer- und Copolymer-Polypropylen-Compounds mit hohen mechanischen Eigenschaften, die in Übereinstimmung mit den Marktanforderungen und Industriestandards entwickelt wurden. Die Produkte sind in einer breiten Farbpalette und in zertifizierten flammhemmenden Versionen erhältlich, sowohl halogenhaltig als auch halogenfrei.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoplen® A H F | PP homo, natural colour medium flowability | 12 g/10' | 1400 MPa | 3,3 Kj/m2 | Classe HB | |
Isoplen® H2 T V | PP homo, natural colour, heat stabilized, high flowability | 20 g/10' | 1400 MPa | 5 Kj/m2 | Classe HB | |
Isoplen® A K F | PP copo, medium flowability | 13 g/10' | 1300 MPa | 11 Kj/m2 | Classe HB | |
Isoplen® A K Z | PP copo, high flowability | 21 g/10' | 1350 MPa | 5,6 Kj/m2 | Classe HB | |
Isoplen® FR V2 | PP copo flame retardant low halogen content | 10 g/10' | 1400 MPa | 10 Kj/m2 | Classe V2 YC | |
Isoplen® HK X V0 HF | Unfilled. Heat stabilized. Flame Retardant grade without halogens. | 10 g/10' | 1600 Mpa | 3,5 KJ/m2 | Classe V0 YC |
Dafnelen®
Homopolymer- und Copolymer-Polypropylen-Compounds mit hohen mechanischen Eigenschaften, die in Übereinstimmung mit den Marktanforderungen und Industriestandards entwickelt wurden. Die Produkte sind in einer breiten Farbpalette und in zertifizierten flammhemmenden Versionen erhältlich, sowohl halogenhaltig als auch halogenfrei.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnelen® HP 605/SW | PP homo 30% glass fiber, flame retardant V0 | 4 g/10' | 8000 MPa | 7 Kj/m2 | Classe V0 YC | |
Dafnelen® HP 505/SW | PP homo 25% glass fiber, flame retardant V0 | 5 g/10' | 6500 MPa | 6 Kj/m2 | Classe V0 | |
Dafnelen® CR 09/K | PP copo flame retardant halogen free UL94 V0 (0,8mm) | 10 g/10' | 1900 MPa | 3,5 Kj/m2 | Classe V0-5VA YC | |
Dafnelen® HP 1003/S | 50% glass fibers chemical grafting. | 3 g/10' | 10500 Mpa | 12 KJ/m2 | Classe HB | |
Dafnelen® HR 17/Y | Unfilled homopolymer polypropylene.Flame Retardant grade Halogen-free according to IEC 61249-2-21 | 17 g/10' | 1500 Mpa | 5 KJ/m2 | Classe V2 |
Xelter® T
Ungesättigte TPEs auf SBC-Basis. Umspritzen und Coextrusion von PP und PP-Compounds. Kundenspezifisch entwickelte Typen für technische Anwendungen.Name | Type | Hardness Shore A ISO 868 | Density ISO 1183 1/A | |
---|---|---|---|---|
Xelter® T 310/320A70-XXX-YYY | TPS-(SBS) | 70 3s | 0,95 g/cm3 | |
Xelter® T 311/321A40-XXX-YYY | TPS-(SBS) | 40 3s | 1,00 g/cm3 | |
Xelter® T 311/321A45-XXX-YYY-F2 | TPS-(SBS) | 45 3s | 1,00 g/cm3 | |
Xelter® T 311/321A50-XXX-YYY-F2 | TPS-(SBS) | 50 3s | 1,00 g/cm3 | |
Xelter® T 311/321A70-XXX-YYY-F | TPS-(SBS) | 70 3s | 1,00 g/cm3 | |
Xelter® T 311/321A75-XXX-YYY-F | TPS-(SBS) | 75 3s | 1,00 g/cm3 | |
Xelter® T 312/322A40-XXX-YYY | TPS-(SBS) | 40 3s | 1,10 g/cm3 | |
Xelter® T 312/322A45-XXX-YYY | TPS-(SBS) | 45 3s | 1,10 g/cm3 | |
Xelter® T 312/322A60-XXX-YYY | TPS-(SBS) | 60 3s | 1,10 g/cm3 | |
Xelter® T 313/323A75-XXX-YYY | TPS-(SBS) | 75 3s | 1,20 g/cm3 |
Sertene® PE
Recyceltes HD Polyethylen für Extrusion und Blasformen.Name | Polymer | Density at 23°C ASTM D792 | MFI ISO 1133 | Izod Notched ISO 180/1° | |
---|---|---|---|---|---|
Sertene® PE HDGRI 0410 | Polyethylene in pellet form | 0,96 g/cm3 | 1,75 g/10' | 15 KJ/m2 | |
Sertene® PE HDNER 1100 | Polyethylene in pellet form | 0,96 g/cm3 | 1,6 g/10' | 12 KJ/m2 | |
Sertene® PE HDROS 0200 | Polyethylene in pellet form | 0,96 g/cm3 | 1,4 g/10' | 13 KJ/m2 |
Dafnelac®
Styrol-Compounds (ABS-SAN-ASA), erhältlich in verschiedenen Qualitäten mit einem breiten Spektrum an Schmelzflussraten, Schlagzähigkeiten und Wärmebeständigkeiten, entsprechend den Marktanforderungen und Industriestandards. Einige Produkte sind glasfaserverstärkt, in der Klasse HB und halogenbasiert flammhemmend mit UL94-Zertifizierung erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden, und hohen oder niedrigen Glanz aufweisen.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnelac® SF/A | ABS high flow, general purpose, antistatic, good impact resistance. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
Dafnelac® SF/A BLACK S4F | High flow, general purpose. Black color. Antistatic. | 1,04 g/cm3 | 34 g/10' | 18 Kj/m2 | HB | |
Dafnelac® SF/B DARK COLOR MATT | ABS good flow, low gloss appearance. Antistatic. UV stabilized. | 1,04 g/cm3 | 30 g/10' | 10 Kj/m2 | HB | |
Dafnelac® FXC NEUTRO/T | ABS with goog heat resistance, good processability. Flame retardant grade with halogens. | 1,20 g/cm3 | 25 g/10' | 10 Kj/m2 | - | |
Dafnelac® SF/B MET | ABS high flow, general purpose, metallized colour. Antistatic. UV stabilized. | 1,04 g/cm3 | 35 g/10' | 12 Kj/m2 | HB | |
Dafnelac® KE | ABS low flow, high impact resistance, suitable for extrusion and vacuumforming. | 1,04 g/cm3 | 5 gr/10' | 25 Kj/m2 | HB | |
Dafnelac® SN | ABS medium flow, general purposes, good impact resistance. | 1,04 g/cm3 | 26 gr/10' | 17 Kj/m2 | HB YC | |
Dafnelac® SF | ABS high flow, general purpose, good impact resistance. | 1,04 g/cm3 | 35 gr/10' | 16 Kj/m2 | HB YC | |
Dafnelac® SN AC | ABS medium flow, improved chemical resistance. | 1,04 g/cm3 | 20 gr/10' | 20 Kj/m2 | HB YC | |
Dafnelac® TM | ABS medium heat resistance Vicat B/50 100°C. | 1,05 g/cm3 | 16 gr/10' | 12 Kj/m2 | HB YC | |
Dafnelac® TH | ABS high heat resistance Vicat B/50 102°C. | 1,05 g/cm3 | 13 gr/10' | 12 Kj/m2 | HB YC | |
Dafnelac® TX | ABS very high heat resistance Vicat B/50 110°C. | 1,05 g/cm3 | 6 gr/10' | 11 Kj/m2 | HB | |
Dafnelac® FXC | ABS flame retardant, UL94 V0 - 5VA on 1,7mm. | 1,18 - 1,20 g/cm3 | 40 gr/10' | 11 Kj/m2 | V0 - 5VA YC | |
Dafnelac® FXC T | ABS flame retardant, with improved heat resistance, UL94 V0 - 5VA on 1,7mm. | 1,2 g/cm3 | 25 gr/10' | 10 Kj/m2 | V0 - 5VA YC | |
Dafnelac® AS3/LT | ASA improved thermal resistance, good chemical, UV and weathering resistance. | 1,07 g/cm3 | 10 gr/10' | 12 Kj/m2 | HB YC | |
Dafnelac® NRP | SAN general purpose for injection moulding, for transparent and solid colors. | 1,07 g/cm3 | 15 gr/10' | 2 Kj/m2 | HB | |
Dafnelac® NRP P04 | SAN 20% glass fiber reinforced. | 1,22 g/cm3 | 9 gr/10' | 3 Kj/m2 | HB | |
Dafnelac® SF/B ATX | ABS high flow and good mechanical properties. Antistatic. UV stabilized. For food compliance uses. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
Dafnelac® SF/B | ABS high flow, general purpose, good impact resistance, antistatic and UV stabilized. | 1,04 g/cm3 | 35 gr/10' | 16 KJ/m2 | HB YC | |
Dafnelac® AS2B | ASA high flow, good mechanical properties. Antistatic. UV stabilized. | 1,07 g/cm3 | 30 gr/10' | 10 KJ/m2 | HB YC | |
Dafnelac® FXC B | ABS flame retardant, UL94 V0 – 5VA on 1,7mm, antistatic and UV stabilized. | 1,18 - 1,20 g/cm3 | 40 gr/10' | 11 KJ/m2 | V0 - 5VA YC |
Isoflex®
Copolymer-Polypropylen, ungefüllt und nicht stabilisiert.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoflex® C800 | Polypropylene copolymer. | 6 g/10' | 800 Mpa | 45 KJ/m2 | / |
Dafneglass®
Glasfaserverstärktes Verbundpolypropylen, chemisch oder mechanisch gebunden, mit hohen thermischen Eigenschaften, exzellenter Schlagzähigkeit und Steifigkeit, gemäß den Standards der Automobil- und Haushaltsgeräteindustrie.Die Produkte sind in den für die jeweiligen Branchen vorgegebenen Farben und selbstverlöschenden Versionen, auch halogenfrei erhältlich.
Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneglass® HP 505/K | PP homo 25% glass fiber, flame retardant grade without halogens, heat stabilized. | 3,5 g/10' | 7000 MPa | 7,3 Kj/m2 | Classe V0 | |
Dafneglass® HP 605/K | 30% chemically coupled glass fiber reinforced polypropylene. V0 flame retardant grade. Heat stabilized. Flame Retardant grade Without halogens. | 2 g/10' | 7600 Mpa | 8 KJ/m2 | Classe HB |
Xelter® S
Gesättigte SBC-basierte TPEs für Spritzguss und Extrusion. Umspritzen und Coextrusion von PP- und PP-Compounds. Alle Härten von 0 bis 90 Sh A. Verschiedene Dichten von 0,9 bis 1,3 g/cm2. Flammhemmende Qualitäten. Qualitäten mit Lebensmittel- und Trinkwasserkontakt. In verschiedenen Farben erhältlich und nach Kundenspezifikationen formuliert.Name | Type | Hardness Shore A ISO 868 | Density ISO 1183 1/A | |
---|---|---|---|---|
Xelter® S 110A60 B01 EG0 F | TPS-(SEBS/SEPS) | 58 3s | 0,90 g/cm3 | |
Xelter® S 110/120A10-XXX-YYY | TPS-(SEBS/SEPS) | 10 3s | 0,88 g/cm3 | |
Xelter® S 110/120A20-XXX-YYY | TPS-(SEBS/SEPS) | 20 3s | 0,88 g/cm3 | |
Xelter® S 110/120A30-XXX-YYY | TPS-(SEBS/SEPS) | 30 3s | 0,88 g/cm3 | |
Xelter® S 110/120A40-XXX-YYY | TPS-(SEBS/SEPS) | 40 3s | 0,88 g/cm3 | |
Xelter® S 110/120A40-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 40 3s | 0,88 g/cm3 | |
Xelter® S 110/120A50-XXX-YYY | TPS-(SEBS/SEPS) | 50 3s | 0,88 g/cm3 | |
Xelter® S 110/120A50-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 50 3s | 0,88 g/cm3 | |
Xelter® S 110/120A55-XXX-YYY-G1 | TPS-(SEBS/SEPS) | 55 3s | 0,88 g/cm3 | |
Xelter® S 110/120A55-XXX-YYY-G2 | TPS-(SEBS/SEPS) | 55 3s | 0,88 g/cm3 | |
Xelter® S 110/120A60-XXX-YYY | TPS-(SEBS/SEPS) | 60 3s | 0,88 g/cm3 | |
Xelter® S 110/120A60-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 60 3s | 0,88 g/cm3 | |
Xelter® S 110/120A60-XXX-YYY-G2 | TPS-(SEBS/SEPS) | 60 3s | 0,88 g/cm3 | |
Xelter® S 110/120A70-XXX-YYY | TPS-(SEBS/SEPS) | 70 3s | 0,88 g/cm3 | |
Xelter® S 110/120A70-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 70 3s | 0,88 g/cm3 | |
Xelter® S 110/120A80-XXX-YYY | TPS-(SEBS/SEPS) | 80 3s | 0,88 g/cm3 | |
Xelter® S 110/120A80-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 80 3s | 0,88 g/cm3 | |
Xelter® S 110/120A90-XXX-YYY | TPS-(SEBS/SEPS) | 90 3s | 0,88 g/cm3 | |
Xelter® S 110/120A90-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 90 3s | 0,88 g/cm3 | |
Xelter® S 111/121A20-XXX-YYY | TPS-(SEBS/SEPS) | 20 3s | 1,00 g/cm3 | |
Xelter® S 111/121A30-XXX-YYY | TPS-(SEBS/SEPS) | 30 3s | 1,00 g/cm3 | |
Xelter® S 111/121A40-XXX-YYY | TPS-(SEBS/SEPS) | 40 3s | 1,00 g/cm3 | |
Xelter® S 111/121A50-XXX-YYY | TPS-(SEBS/SEPS) | 50 3s | 1,00 g/cm3 | |
Xelter® S 111/121A50-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 50 3s | 1,00 g/cm3 | |
Xelter® S 111/121A60-XXX-YYY | TPS-(SEBS/SEPS) | 60 3s | 1,00 g/cm3 | |
Xelter® S 111/121A60-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 60 3s | 1,00 g/cm3 | |
Xelter® S 111/121A70-XXX-YYY | TPS-(SEBS/SEPS) | 70 3s | 1,00 g/cm3 | |
Xelter® S 111/121A70-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 70 3s | 1,00 g/cm3 | |
Xelter® S 111/121A80-XXX-YYY | TPS-(SEBS/SEPS) | 80 3s | 1,00 g/cm3 | |
Xelter® S 111/121A80-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 80 3s | 1,00 g/cm3 | |
Xelter® S 111/121A90-XXX-YYY | TPS-(SEBS/SEPS) | 90 3s | 1,00 g/cm3 | |
Xelter® S 111/121A90-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 90 3s | 1,00 g/cm3 | |
Xelter® S 112/122A30-XXX-YYY | TPS-(SEBS/SEPS) | 30 3s | 1,10 g/cm3 | |
Xelter® S 112/122A40-XXX-YYY | TPS-(SEBS/SEPS) | 40 3s | 1,10 g/cm3 | |
Xelter® S 112/122A50-XXX-YYY | TPS-(SEBS/SEPS) | 50 3s | 1,10 g/cm3 | |
Xelter® S 112/122A50-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 50 3s | 1,10 g/cm3 | |
Xelter® S 112/122A60-XXX-YYY | TPS-(SEBS/SEPS) | 60 3s | 1,10 g/cm3 | |
Xelter® S 112/122A60-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 60 3s | 1,10 g/cm3 | |
Xelter® S 112/122A70-XXX-YYY | TPS-(SEBS/SEPS) | 70 3s | 1,10 g/cm3 | |
Xelter® S 112/122A70-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 70 3s | 1,10 g/cm3 | |
Xelter® S 112/122A80-XXX-YYY | TPS-(SEBS/SEPS) | 80 3s | 1,10 g/cm3 | |
Xelter® S 112/122A80-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 80 3s | 1,10 g/cm3 | |
Xelter® S 112/122A90-XXX-YYY | TPS-(SEBS/SEPS) | 90 3s | 1,10 g/cm3 | |
Xelter® S 112/122A90-XXX-YYY-E1 | TPS-(SEBS/SEPS) | 90 3s | 1,10 g/cm3 | |
Xelter® S 113/123A30-XXX-YYY | TPS-(SEBS/SEPS) | 30 3s | 1,20 g/cm3 | |
Xelter® S 113/123A40-XXX-YYY | TPS-(SEBS/SEPS) | 40 3s | 1,20 g/cm3 | |
Xelter® S 113/123A40-XXX-YYY-G1 | TPS-(SEBS/SEPS) | 40 3s | 1,20 g/cm3 | |
Xelter® S 113/123A45-XXX-YYY-G1 | TPS-(SEBS/SEPS) | 45 3s | 1,20 g/cm3 | |
Xelter® S 113/123A50-XXX-YYY | TPS-(SEBS/SEPS) | 50 3s | 1,20 g/cm3 | |
Xelter® S 113/123A60-XXX-YYY | TPS-(SEBS/SEPS) | 60 3s | 1,20 g/cm3 | |
Xelter® S 113/123A70-XXX-YYY | TPS-(SEBS/SEPS) | 70 3s | 1,20 g/cm3 | |
Xelter® S 113/123A80-XXX-YYY | TPS-(SEBS/SEPS) | 80 3s | 1,20 g/cm3 | |
Xelter® S 113/123A90-XXX-YYY | TPS-(SEBS/SEPS) | 90 3s | 1,20 g/cm3 |
Xelter® V
Dynamisch vulkanisierte TPEs für Spritzguss, Extrusion, Blasformen und Kalandrieren. Umspritzen und Coextrusion von PP- und PP-Compounds. Härten von 35 Sh A bis 50 Sh D. Leicht einfärbbare und leicht zu verarbeitende Typen. Flammhemmende Qualitäten. Qualitäten für den Kontakt mit Lebensmitteln. Kundenspezifisch entwickelte Typen.Name | Type | Hardness Shore A ISO 868 | Density ISO 1183 1/A | |
---|---|---|---|---|
Xelter® V 410/420A35-XXX-YYY | TPV-(PP+EPDM) | 35 3s | 0,90 g/cm3 | |
Xelter® V 410/420A40-XXX-YYY | TPV-(PP+EPDM) | 40 3s | 0,90 g/cm3 | |
Xelter® V 410/420A40-XXX-YYY-G2 | TPV-(PP+EPDM) | 40 3s | 0,90 g/cm3 | |
Xelter® V 410/420A50-XXX-YYY | TPV-(PP+EPDM) | 50 3s | 0,90 g/cm3 | |
Xelter® V 410/420A60-XXX-YYY | TPV-(PP+EPDM) | 60 3s | 0,90 g/cm3 | |
Xelter® V 410/420A60-XXX-YYY-E1 | TPV-(PP+EPDM) | 60 3s | 0,95 g/cm3 | |
Xelter® V 410/420A60-XXX-YYY-G1 | TPV-(PP+EPDM) | 60 3s | 0,95 g/cm3 | |
Xelter® V 410/420A65-XXX-YYY-G2 | TPV-(PP+EPDM) | 65 3s | 0,90 g/cm3 | |
Xelter® V 410/420A70-XXX-YYY | TPV-(PP+EPDM) | 70 3s | 0,90 g/cm3 | |
Xelter® V 410/420A70-XXX-YYY-E1 | TPV-(PP+EPDM) | 70 3s | 0,95 g/cm3 | |
Xelter® V 410/420A70-XXX-YYY-G1 | TPV-(PP+EPDM) | 70 3s | 0,95 g/cm3 | |
Xelter® V 410/420A80-XXX-YYY | TPV-(PP+EPDM) | 80 3s | 0,90 g/cm3 | |
Xelter® V 410/420A90-XXX-YYY | TPV-(PP+EPDM) | 90 3s | 0,90 g/cm3 | |
Xelter® V 410/420A90-XXX-YYY-E1 | TPV-(PP+EPDM) | 90 3s | 0,95 g/cm3 | |
Xelter® V 410/420D40-XXX-YYY | TPV-(PP+EPDM) | 40 3s | 0,90 g/cm3 | |
Xelter® V 430A90-XXX-YYY | TPV-(PP+EPDM) | 90 3s | 0,90 g/cm3 | |
Xelter® V 430D40-XXX-YYY | TPV-(PP+EPDM) | 40 3s | 0,90 g/cm3 |
Xelter® tech
Qualitäten zum Umspritzen und für die Coextrusion auf polare technische Kunststoffe. Kundenspezifisch entwickelte Typen.Name | Type | Hardness Shore A ISO 868 | Density ISO 1183 1/A | |
---|---|---|---|---|
Xelter® tech A11/A21A50-XXX-YYY | Hybrid & High-Tech | 50 3s | 1,02 g/cm3 | |
Xelter® tech A11/A21A65-XXX-YYY | Hybrid & High-Tech | 65 3s | 1,04 g/cm3 | |
Xelter® tech A11/A21A70-XXX-YYY | Hybrid & High-Tech | 70 3s | 1,06 g/cm3 | |
Xelter® tech B11/B21A60-XXX-YYY | Hybrid & High-Tech | 60 3s | 1,04 g/cm3 | |
Xelter® tech B11/B21A70-XXX-YYY | Hybrid & High-Tech | 70 3s | 1,08 g/cm3 | |
Xelter® tech B11/B21A80-XXX-YYY | Hybrid & High-Tech | 80 3s | 1,08 g/cm3 | |
Xelter® tech E11/E21A35-XXX-YYY-E1 | Hybrid & High-Tech | 35 3s | 0,95 g/cm3 | |
Xelter® tech E11/E21A40-XXX-YYY | Hybrid & High-Tech | 40 3s | 0,98 g/cm3 | |
Xelter® tech E11/E21A40-XXX-YYY-E1 | Hybrid & High-Tech | 40 3s | 0,95 g/cm3 | |
Xelter® tech E11/E21A45-XXX-YYY-G1 | Hybrid & High-Tech | 45 3s | 0,95 g/cm3 | |
Xelter® tech E13/E23A35-XXX-YYY-G1 | Hybrid & High-Tech | 35 3s | 1,20 g/cm3 | |
Xelter® tech E13/E23A40-XXX-YYY-G1 | Hybrid & High-Tech | 40 3s | 1,20 g/cm3 |
Isodur®
Polyester-Compounds (PBT) in verschiedenen Qualitäten, mit hoher Wärme- und Chemikalienbeständigkeit sowie guter Dimensionsstabilität. Unsere Produkte können wie folgt eingestellt werden: glasfaserverstärkt, flammhemmend auf Halogenbasis, UL94 zertifiziert. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isodur® A 15 10 GF20 | PBT 20% glass fiber reinforced. | 1,45 g/cm3 | 5500 MPa | 7 Kj/m2 | HB | |
Isodur® A 15 10 GF30 | PBT 30% glass fiber reinforced. | 1,56 g/cm3 | 8500 MPa | 8 Kj/m2 | HB | |
Isodur® 15 10 GF20 V0 | PBT 20% glass fiber reinforced, flame retardant UL94 V0 1,5mm. | 1,57/1,59 g/cm3 | 7000 MPa | 7 Kj/m2 | V0 YC |
Dafneloy® V
Polyester-Compounds (PBT) in verschiedenen Qualitäten, mit hoher Wärme- und Chemikalienbeständigkeit sowie guter Dimensionsstabilität. Unsere Produkte können wie folgt eingestellt werden: glasfaserverstärkt, flammhemmend auf Halogenbasis, UL94 zertifiziert. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneloy® V B P03 | PBT 15% glass fiber. | 1,41 - 1,44 g/cm3 | 4500 MPa | 3 Kj/m2 | - | |
Dafneloy® V B P06 | PBT 30% glass fiber reinforced. | 1,56 g/cm3 | 8500 MPa | 8 Kj/m2 | HB | |
Dafneloy® V XA P06 | PBT 30% glass fiber, flame retardant UL94 V0 1,7mm. | 1,65 g/cm3 | 9500 MPa | 8 Kj/m2 | V0 YC |
Isofil®
Standard- und High-Performance-modifiziertes Polypropylen mit verschiedenen mineralischen Füllstoffen (T/TC/CaCO3/BaSO4/Glimmer) in Übereinstimmung mit den Marktanforderungen und Industriestandards. Produkte mit Anwendungsmerkmalen in gemeinsam mit Kunden entwickelten Farben und Spezifikationen. Zertifizierte flammhemmende Versionen sind sowohl halogenhaltig als auch halogenfrei erhältlich.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isofil® H 20 TP X | PP homo 20% talc natural colour | 9 g/10' | 2600 MPa | 3 Kj/m2 | Classe HB | |
Isofil® H 40 TP F | PP homo 40% talc | 12 g/10' | 4000 MPa | 2,4 Kj/m2 | Classe HB | |
Isofil® K 20 TP X | PP copo 20% talc | 10 g/10' | 2000 MPa | 7 Kj/m2 | Classe HB | |
Isofil® K 40 TP V | PP copo 40% talc | 20 g/10' | 3400 MPa | 4,2 Kj/m2 | Classe HB | |
Isofil® HK 10 TVHM | 10% micro talc filled polypropylene. | 20 g/10' | 2400 MPa | 4 Kj/m2 | Classe HB YC | |
Isofil® HK 30 TVH0 | 30% talc filled homopolymer polypropylene. | 20 g/10' | 3400 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 35 GVH0 | 35% talc filled copolymer polypropylene. | 21 g/10' | 3100 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® K 40 T | 40% talc filled polypropylene. | 7 g/10' | 4200 Mpa | 2,6 KJ/m2 | Classe HB | |
Isofil® K 20 T xxx HB | 20% talc filled copolymer polypropylene. | 16 g/10' | 2300 Mpa | 6,5 KJ/m2 | Classe HB YC | |
Isofil® HK 20 TCH0 | 20% mineral filled polypropylene. Heast stabilized. | 6 g/10' | 2300 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 20 TFH0 | 20% mineral filled polypropylene. Heat stabilized. | 13 g/10' | 2300 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® K 40 T xxx HB | 40% talc filled copolymer polypropylene. Heat stabilized. | 8 g/10' | 3800 Mpa | 2,6 KJ/m2 | Classe HB YC | |
Isofil® HK 30 TSH1 | 30% talc filled polypropylene homopolymer. Heat stabilized. | 3 g/10' | 3500 Mpa | 5 KJ/m2 | Classe HB YC | |
Isofil® H 40 C2 F | 40% calcium carbonate filled homopolymer polypropylene. | 13 g/10' | 2500 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 30 TTH1 | 30% talc filled polypropylene. UV stabilized. Heat stabilized. | 3 g/10' | 3400 Mpa | 2,3 KJ/m2 | Classe HB YC | |
Isofil® HK 30 TXH0 | 30% talc filled polypropylene. Heat stabilized. | 8 g/10' | 3300 Mpa | 2,7 KJ/m2 | Classe HB YC | |
Isofil® HK 40 2FH0 | 40% calcium carbonate filled polypropylene. Heat stabilized. | 13 g/10' | 2500 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 40 5FH0 | 40% calcium carbonate polypropylene. | 13 g/10' | 2500 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 40 TTH0 | 40% talc filled homopolymer polypropylene. Heat stabilized. | 4 g/10' | 3800 Mpa | 2,4 KJ/m2 | Classe HB YC | |
Isofil® HK 50 C2 V | 50% calcium carbonate homopolymer polypropylene. Heat stabilized. | 18 g/10' | 3100 Mpa | 2,5 KJ/m2 | Classe HB YC | |
Isofil® HK 30 TFH2 | 30% talc filled polypropylene. | 14 g/10' | 34600 Mpa | 3,8 KJ/m2 | Classe HB YC | |
Isofil® HK 20 TFHH | 20% talc filled polypropylene. Heat stabilized. Detergent Resistant. | 5 g/10' | 2200 Mpa | 3,9 KJ/m2 | Classe HB YC | |
Isofil® H 40 C2 X | 40% calcite filled homopolymer polypropylene. | 9 g/10' | 2400 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 25 TVH0 | 25% talc filled copolymer polypropylene. | 23 g/10' | 1800 Mpa | 7 KJ/m2 | Classe HB YC | |
Isofil® HK 40 TVH0 | 40% talc filled copolymer polypropylene. | 18 g/10' | 4000 Mpa | 3 KJ/m2 | Classe HB YC | |
Isofil® HK 30 TVH2 | 30% talc filled polypropylene. | 16 g/10' | 3200 Mpa | 3,3 KJ/m2 | Classe HB YC | |
Isofil® HK 50 2FH0 | 50% calcium carbonate filled polypropylene. | 20 g/10' | 2800 Mpa | 3,5 KJ/m2 | Classe HB | |
Isofil® HK 30 TTH0 | 30% talc polypropylene. | 4 g/10' | 3300 Mpa | 3,1 KJ/m2 | Classe HB YC | |
Isofil® K 0 T xxx HB | Copolymer polypropylene. | 17 g/10' | 1200 Mpa | 7,9 KJ/m2 | Classe HB YC | |
Isofil® HK 25 GVH | 25% talc filled copolymer polypropylene. | 16 g/10' | 2200 Mpa | 5,1 KJ/m2 | Classe HB YC | |
Isofil® HK 20 2VH0 | 20% calcium carbonate polypropylene. Heat stabilized. | 16 g/10' | 1850 Mpa | 2,4 KJ/m2 | Classe HB YC | |
Isofil® HK 25 GVH1 | 25% talc copolymer polypropylene. Heat stabilized. | 17 g/10' | 2000 Mpa | 12,9 KJ/m2 | Classe HB YC | |
Isofil® KPZ 4001D | 20% talc filled copolymer polypropylene. Heat stabilized. | 20 g/10' | 2400 Mpa | 4,7 KJ/m2 | Classe HB YC | |
Isofil® RV 4603S | 20% talc filled impact modified polypropylene. Compliant to TL 52388-F. UV stabilized. Scratch Resistant. | 18 g/10' | 2000 Mpa | 35 KJ/m2 | Classe HB | |
Isofil® MV 4509Y | 20% talc filled polypropylene copolymer. Impact modified. UV stabilized. Scratch Resistant. | 26 g/10' | 1900 Mpa | 30 KJ/m2 | Classe HB | |
Isofil® K 20 T 48.450 AFU | 20% talc filled copolymer polypropylene. Impact modified and scratch resistant. UV stabilized. | 19 g/10' | 1700 Mpa | 45 KJ/m2 | Classe HB | |
Isofil® MF 4124S | 20% talc filled polypropylene compound. It exhibits high stiffness and low emission properties. Scratch Resistant. | 15 g/10' | 2700 Mpa | 4 KJ/m2 | Classe HB | |
Isofil® MY 2205Y | 10% talc filled copolymer polypropylene. Low emission grade. Scratch Resistant. | 25 g/10' | 1600 Mpa | 18 KJ/m2 | Classe HB | |
Isofil® K 10 T 53.180U | 13% talc filled copolymer polypropylene. UV stabilized. Scratch Resistant. | 15 g/10' | 1650 Mpa | 18 KJ/m2 | Classe HB | |
Isofil® SV 4205Y | 20% talc filled polypropylene copolymer. Good flowability and stiffness. UV stabilized. Scratch Resistant. | 16 g/10' | 2300 Mpa | 6 KJ/m2 | Classe HB | |
Isofil® RF 3403Y | 15% talc filled polypropylene copolymer. Impact modified. High fluidity. Low CLTE. UV stabilized. Scratch Resistant. | 15 g/10' | 1700 Mpa | 25 KJ/m2 | Classe HB | |
Isofil® K 10 T 46.400 AFU | 10% talc filled copolymer polypropylene. Scratch resistant. UV stabilized. | 22 g/10' | 1300 Mpa | 40 KJ/m2 | Classe HB | |
Isofil® H 20 TP F HS | 20% Talc filled polypropylene homopolymer. Low emission. Compliant to VW44045-PP6.Heat stabilized. | 12 g/10' | 2800 Mpa | 3 KJ/m2 | Classe Hb | |
Isofil® MF 3604Y | 16% talc filled polypropylene. Impact resistance grade. UV stabilized. Scratch Resistant. | 14 g/10' | 1500 Mpa | 30 KJ/m2 | Classe HB | |
Isofil® MZ 3506Y | 17% talc filled copolymer polypropylene. Good flowability. Low emission. UV stabilized. Heat stabilized. Scratch Resistant. | 22 g/10' | 2000 Mpa | 25 KJ/m2 | Classe HB | |
Isofil® H 40 TG S HS | 40% talc filled polypropylene homopolymer. | 10 kg/10' | 4100 Mpa | 3,5 KJ/m2 | Classe HB | |
Isofil® H 20 T F UV | 20% talc filled homopolymer polypropylene. UV stabilized. | 15 g/10' | 2600 Mpa | 2,5 KJ/m2 | Classe HB | |
Isofil® SF 4303U | 20% talc filled copolymer polypropylene with good stiffness and impact resistance. UV stabilized. | 15 g/10' | 1800 Mpa | 15 KJ/m2 | Classe HB | |
Isofil® K 30 T 60.90L | 30% talc filled copolymer polypropylene. UV stabilized. | 16 g/10' | 2300 Mpa | 9 KJ/m2 | Classe HB | |
Isofil® SV 4118X | 20% talc filled homopolymer polypropylene. Compliant to TL 52658-WD01. UV stabilized. Heat stabilized. | 16 g/10' | 2800 Mpa | 2,5 KJ/m2 | Classe HB | |
Isofil® PZ 8103H | 40% talc filled polypropylene homopolymer. Heat stabilized. | 20 g/10' | 4300 Mpa | 3 KJ/m2 | Classe HB | |
Isofil® HF 6205X | 30% talc filled copolymer polypropylene. UV stabilized. Heat stabilized. | 14 g/10' | 2300 Mpa | 6 KJ/m2 | Classe HB | |
Isofil® SW 4909U | 20% talc filled copolymer polypropylene. Impact modified grade with high flowability. UV stabilized. | 40 g/10' | 1500 Mpa | 40 KJ/m2 | Classe HB | |
Isofil® K 20 T 50.400LCE SR AF | 17% talc filled copolymer polypropylene. Low CLTE and scratch resistant. UV stabilized. | 32 g/10' | 1450 Mpa | 40 KJ/m2 | Classe HB | |
Isofil® SF 4501Y | 20% talc filled copolymer polypropylene. Impact modified grade. UV stabilized. Scratch Resistant. | 14 g/10' | 1900 Mpa | 20 KJ/m2 | Classe HB | |
Isofil® K 30 T 50.200LCE SR AF | 30% talc filled copolymer polypropylene. High impact. Scratch resistant. High fluidity. UV stabilized. | 33 g/10' | 1700 Mpa | 20 KJ/m2 | Classe HB | |
Isofil® PF 4102H | 20% Talc filled polypropylene homopolymer. Low emission. Compliant to VW44045-PP6 and WSS-M4D729-B1. Heat stabilized. | 12 g/10' | 2800 Mpa | 3 KJ/m2 | Classe HB | |
Isofil® HK 20 TP F HS | 20% talc filled copolymer polypropylene. | 12 g/10' | 2200 Mpa | 6 KJ/m2 | Classe HB | |
Isofil® HF 2206H L | 10% talc filled polypropylene copolymer. Heat stabilized. Laserable. | 12 g/10' | 1500 Mpa | 8 KJ/m2 | Classe HB | |
Isofil® HK 20 T V0 | 20% talc filled copolymer polypropylene. Heat stabilized. Flame Retardant grade With halogens | 6 g/10' | 2900 Mpa | 3,5 KJ/m2 | Classe HB | |
Isofil® H 40 TG X HS | 40% talc filled homopolymer polypropylene. Compliant to VW 44045-PP8. Heat stabilized. | 15 g/10' | 4000 Mpa | 2,5 KJ/m2 | Classe HB | |
Isofil® MZ 2102H | 10% talc filled homopolymer polypropylene. Low emission grade. | 25 g/10' | 2350 Mpa | 3,5 KJ/m2 | Classe HB | |
Isofil® KGF 4002U | 21,5% talc filled copolymer polypropylene. UV stabilized. | 12 g/10' | 2000 Mpa | 4 KJ/m2 | Classe HB | |
Isofil® HK 25 6VH | 25% talc-calcium carbonate filled polypropylene. | 16 g/10' | 2400 Mpa | 5 KJ/m2 | Classe HB YC | |
Isofil® HZ 9101D | 40% talc filled homopolymer polypropylene. Good flowability. | 23 g/10' | 4100 Mpa | 2,5 KJ/m2 | Classe HB | |
Isofil® MC 4214Y | 20% talc filled copolymer polypropylene. UV stabilized. Scratch Resistant. | 8 g/10' | 2300 Mpa | 7 KJ/m2 | Classe HB |
Dafneloy® D
Thermoplastische Acrylatverbindungen (PMMA) mit hoher Transparenz und Glanz. Unsere Produkte sind nach UL94 gelistet, naturfarben oder nach spezifischen Kundenanforderungen eingefärbt erhältlich.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneloy® D A8 | PMMA medium flow, high mechanical strength, for transparent and solid colors. | 1,16 - 1,18 g/cm3 | 7 gr/10' | 2 Kj/m2 | HB YC | |
Dafneloy® D A9 | PMMA low flow, high mechanical strength, for transparent and solid colors. | 1,16 - 1,18 g/cm3 | 3 gr/10' | 2 Kj/m2 | HB YC | |
Dafneloy® D H | PMMA good impact resistance. | 1,16 g/cm3 | 1,5 gr/10' | 6 Kj/m2 | HB |
Isoglass®
Glasfaserverstärktes Verbundpolypropylen, chemisch oder mechanisch gebunden, mit hohen thermischen Eigenschaften, exzellenter Schlagzähigkeit und Steifigkeit, gemäß den Standards der Automobil- und Haushaltsgeräteindustrie.Die Produkte sind in den für die jeweiligen Branchen vorgegebenen Farben und selbstverlöschenden Versionen, auch halogenfrei erhältlich.
Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoglass® H 30 FVL C | PP homo 30% glass fiber. Heat stabilized. | 6 g/10' | 5800 MPa | 11,5 Kj/m2 | Classe HB YC | |
Isoglass® H 20 FVL X | 20% glass fiber polypropylene. Heat stabilized. | 8 g/10' | 3900 Mpa | 7,4 KJ/m2 | Classe HB YC | |
Isoglass® HGV 6002D | 30% glass fiber homopolymer polypropylene. Heat stabilized. Detergent Resistant. | 17 g/10' | 5600 Mpa | 9,1 KJ/m2 | Classe HB YC | |
Isoglass® H3V 6009D | 30% talc filled and glass fiber reinforced polypropylene homopolymer. Heat stabilized. Detergent resistant. | 17 g/10' | 4700 Mpa | 5 KJ/m2 | Classe HB YC | |
Isoglass® H 20 CGF X HS | 20% chemically coupled glass fiber reinforced homopolymer polypropylene. Compliant to VW 44045-PP9. Heat stabilized. | 8 g/10' | 4000 Mpa | 7 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF C UV | 30% chemically coupled glass fiber reinforced polypropylene. Low odor and emission. Compliant to VW44045-PP10 and VW50180. UV stabilized. Heat stabilized. | 5 g/10' | 5800 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® K 30 CGF X | 30% glass fiber reinforced copolymer polypropylene. | 8 g/10' | 4000 Mpa | 16 KJ/m2 | Classe HB | |
Isoglass® 4F 4030U | 22% chemically coupled glass fiber and mineral filled reinforced polypropylene copolymer. Good stiffness and impact strenght balance combined with high flowability. UV stabilized. | 14 g/10' | 3200 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF F UV | 30% glass fiber reinforced homopolymer polypropylene. UV stabilized. | 13 g/10' | 5000 Mpa | 8 KJ/m2 | Classe HB | |
Isoglass® ST 8020N | 40% chemically coupled glass fiber reinforced polypropylene homopolymer. UV stabilized. Heat stabilized. | 4 g/10' | 8000 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF S HS | 30% glass fiber reinforced homopolymer polypropylene. Heat stabilized. | 5 kg/10' | 6000 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® SC 6029X | 30% chemically coupled glass fiber reinforced copolymer polypropylene. UV stabilized. Heat stabilized. | 5 g/10' | 4500 Mpa | 22 KJ/m2 | Classe HB | |
Isoglass® H 30 GFT3 C HS | 30% glass fiber and talc filled polypropylene. Compliant to MS-55246 PP130.50. Heat stabilized. | 8 g/10' | 4500 Mpa | 7 KJ/m2 | Classe HB | |
Isoglass® HGV 6003X | 30% chemically coupled glass fiber reinforced polypropylene. High flowability. UV stabilized. Chemical Resistant. | 20 g/10' | 5500 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF 140.80 | 30% glass fiber reinforced homopolymer polypropylene. Compliant to MS-55246 PP140.80. Heat stabilized. | 18 g/10' | 5700 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF C | 30% chemically coupled glass fiber reinforced polypropylene. Heat stabilized. | 5 g/10' | 6000 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® XX 6014D | 30% chemically coupled glass fiber reinforced polypropylene, high stiffness. Heat stabilized. | 8 g/10' | 7000 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® SX 4010H | 20% chemically coupled glass fiber reinforced homopolymer polypropylene. Compliant to Renault-Nissan AS8. Heat stabilized. | 10 g/10' | 4000 Mpa | 8 KJ/m2 | Classe HB | |
Isoglass® H 30 CGF X HS | 30% chemically coupled glass fiber reinforced polypropylene. Heat stabilized. | 8 g/10' | 6000 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® SX 4015X | 20% chemically coupled glass fiber reinforced homopolymer polypropylene. Compliant to VW 44045. UV stabilized. Heat stabilized. | 8 g/10' | 3800 Mpa | 6 KJ/m2 | Classe HB | |
Isoglass® K 20 CGF X | 20% glass fiber reinforced copolymer polypropylene. | 10 g/10' | 3400 Mpa | 13 KJ/m2 | Classe HB | |
Isoglass® EV 3007U | 15% chemically coupled glass fiber reinforced polypropylene copolymer. High flowability grade and good aesthetical appearance. UV stabilized. | 18 g/10' | 2600 Mpa | 12 KJ/m2 | Classe HB | |
Isoglass® H 25 CGF C UV | 25% chemically coupled glass fibre reinforced Polypropylene. Antistatic.UV stabilized. | 6 g/10' | 5400 Mpa | 11 KJ/m2 | Classe HB | |
Isoglass® H 30 FVL V | 30% glass fiber filled homopolymer polypropylene. | 20 g/10' | 5700 Mpa | 10 KJ/m2 | Classe HB YC | |
Isoglass® SX 8022H | 40% chemically coupled glass fiber reinforced polypropylene homopolymer. Heat stabilized. | 10 g/10' | 7700 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® H 20 CGF X | 20% glass fiber reinforced homopolymer polypropylene. | 8 g/10' | 3800 MPa | 8 Kj/m2 | Classe HB | |
Isoglass® H 40 CGF C | 40% glass fiber reinforced homopolymer polypropylene. | 7 g/10' | 7600 MPa | 9 Kj/m2 | Classe HB | |
Isoglass® K 40 CGF C | 40% glass fiber reinforced copolymer polypropylene. | 4 g/10' | 6200 MPa | 15 Kj/m2 | Classe HB |
Dafneblend®
Compounds, die in einer breiten Palette von verschiedenen Polymerlegierungen erhältlich sind. Unser Portfolio umfasst verstärkte Qualitäten, halogenhaltige oder halogenfreie flammhemmende Typen, die nach UL94 zertifiziert sind. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | Vicat B/50 ISO 306 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneblend® PK 202/L | Blend PA/ABS with high flow and good mechanical properties. UV stabilized. | 1,06 g/cm3 | 115 °C | 50 Kj/m2 | HB | |
Dafneblend® PM 200 | Blend ABS/PC general purpose, good flow properties. | 1,10 - 1,12 g/cm3 | 110 °C | 30 Kj/m2 | HB YC | |
Dafneblend® PM 500 | Blend PC/ABS general purpose, good flow properties and good impact resistance. | 1,13 - 1,15 g/cm3 | 118 °C | 35 Kj/m2 | HB YC | |
Dafneblend® PM 700 | Blend PC/ABS general purpose, good flow properties, good impact and heat resistance. | 1,15 - 1,16 g/cm3 | 129 °C | 55 Kj/m2 | HB YC | |
Dafneblend® PM 750XF | Blend PC/ABS flame retardant UL94 V1 1,5mm, halogen free, ball pressure test 125°C. | 1,16 g/cm3 | 130 °C | 50 Kj/m2 | V1 |
Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneblend® PM 700XF | Blend PC/ABS flame retardant UL94 V0 1,5 mm, halogen free. | 1,18 g/cm3 | 2300 MPa | 50 Kj/m2 | V0 YC | |
Dafneblend® PL 200/E | Blend PC/PBT impact modified, good mechanical resistance. | 1,22 g/cm3 | 2200 MPa | 50 Kj/m2 | HB | |
Dafneblend® PL 300/EC | Blend PC/PBT impact modified, good chemical resistance. | 1,18 g/cm3 | 1600 MPa | 60 Kj/m2 | HB | |
Dafneblend® PL 706 | Blend PC/PBT 30% glass fiber, low warpage, good chemical resistance. | 1,47 - 1,49 g/cm3 | 8000 MPa | 10 Kj/m2 | HB |
Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneblend® PK 201 | Blend PA/ABS good mechanical properties, good chemical resistance. | 1,07 g/cm3 | 30 gr/10' | 60 Kj/m2 | HB YC | |
Dafneblend® PK 202 | Blend PA/ABS high flowability and good mechanical properties, good chemical resistance. | 1,06 g/cm3 | 55 gr/10' | 50 Kj/m2 | HB YC | |
Dafneblend® PX 200 L | Blend PC/ASA good UV and weathering resistance, good impact strength. | 1,10 - 1,13 g/cm3 | 12 gr/10' | 30 Kj/m2 | HB | |
Dafneblend® PX500 L | Blend PC/ASA good UV and weathering resistance, high heat resistance, good impact strength. | 1,13 - 1,16 g/cm3 | 20 g/10' | 40 Kj/m2 | HB |
Isoglass® XT
Hochleistungs-Polypropylen mit chemisch gekoppelten Glasfasern. Die von dieser PPGF-Reihe garantierten Eigenschaften orientieren sich an denen von Hochleistungspolymeren, wobei jedoch die Eigenschaften von PP garantiert werden. Diese Produkte bieten eine gute Kombination aus Wärmebeständigkeit und mechanischer Festigkeit in Verbindung mit hoher Steifigkeit.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoglass® XT 4001D | 20% chemically coupled glass fiber reinforced polypropylene. | 7 g/10' | 4000 Mpa | 7 KJ/m2 | Classe HB YC | |
Isoglass® XT 6001D | 30% chemically coupled high performance glass fiber reinforced polypropylene compound. | 5 g/10' | 6800 Mpa | 11 KJ/m2 | Classe HB YC | |
Isoglass® XT 8008H | 40% chemically coupled high performance glass fiber reinforced polypropylene homopolymer. High stiffness and low emission. | 5 g/10' | 10000 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® XT 4007U | 20% chemically coupled high performance reinforced polypropylene homopolymer. High stiffness and low emission. Compliant to DBL 5430. UV stabilized. | 7 g/10' | 6100 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® XT 6010H | 30% chemically coupled high performance glass fiber reinforced polypropylene homopolymer. High stiffness and low emission. | 6 g/10' | 8400 Mpa | 10 KJ/m2 | Classe HB | |
Isoglass® XT 1003H | 50% chemically coupled high performance glass fiber reinforced polypropylene homopolymer. High stiffness grade. Heat stabilized. | 3,5 g/10' | 13000 Mpa | 9 KJ/m2 | Classe HB | |
Isoglass® XT 7001H | 35% chemically coupled glass fiber reinforced polypropylene homopolymer. Low flowability grade. Heat stabilized. | 3 g/10' | 8000 Mpa | 12 KJ/m2 | Classe HB | |
Isoglass® XT 6001H | 30% chemically coupled high performance glass fiber reinforced polypropylene. Heat stabilized. | 3,5 g/10' | 6500 Mpa | 10 KJ/m2 | Classe HB |
Dafnelan®
Compounds auf Basis von copolymerem oder homopolymerem Polyoxymethylen (POM) mit hoher Steifigkeit und hervorragender Verschleißfestigkeit. Unsere Produkte sind glasfaserverstärkt, schlagzäh modifiziert und Silikon-, PTFE- oder Molybdändisulfid-geschmiert erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnelan® LR2 | POM OMO general purpose, high viscosity. | 1,42 g/cm3 | 2 gr/10' | 15 Kj/m2 | HB | |
Dafnelan® LR12 | POM OMO general purpose, medium viscosity. | 1,40 g/cm3 | 12 gr/10' | 9 Kj/m2 | HB | |
Dafnelan® LR9 P03/E | POM OMO 15% glass fibers, medium viscosity, high stiffness, low warpage. | 1,50 g/cm3 | 8 gr/10' | 5 Kj/m2 | HB | |
Dafnelan® GR9 T02 | POM COP PTFE modified. | 1,45 g/cm3 | 9 gr/10' | 5 Kj/m2 | HB | |
Dafnelan® GR9 T04 | POM COP PTFE modified | 1,48 - 1,50 g/cm3 | 9 gr/10' | 5 Kj/m2 | HB | |
Dafnelan® GR9 MS1 | POM COP lubricated MoS2. | 1,40 g/cm3 | 10 gr/10' | 6 Kj/m2 | HB |
Isoglass® LFT
Polypropylen-Pultrusionscompound mit langen Fasern für Anwendungen mit hoher Dimensionsstabilität und hoher thermischer und mechanischer Performance. Der Einsatz von PP LFT ist vor allem bei konstruktiven Anwendungen gefragt, bei denen die Orientierung der langen Fasern den anisotropen Effekt modifiziert, wodurch die Dimensionsstabilität erhöht und Anwendungen mit sehr hoher Steifigkeit erreicht werden. Die Produktpalette ist mit verschiedenen Fasergehalten erhältlich, auch mit hohen Konzentrationen.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoglass® LFT 1001H | PP homo 50% long glass fiber, heat stabilized. | / | 10500 MPa | 29 Kj/m2 | Classe HB | |
Isoglass® LFT LFT 0603H | 30% chemically coupled long glass fiber reinforced polypropylene compound with very high mechanical properties and heat stabilized. | / | 6300 Mpa | 21 Kj/m2 | Classe HB |
Dafnetec®
Hochleistungs-Polyphenylensulfid-Compounds (PPS) mit hoher Wärme- und Chemikalienbeständigkeit. Gute Feuerbeständigkeit. Die Produkte können Glas- und Kohlefaserverstärkt und Mineralgefüllt sein. Sie können nach spezifischen Kundenanforderungen eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnetec® PPS P08 | PPS 40% glass fiber, flame retardante UL94 V0 1,6mm. | 1,66/1,68 g/cm3 | 15200 MPa | 10 Kj/m2 | V0 | |
Dafnetec® PPS G12 | PPS glass fiber and mineral filler, flame retardante UL94 V0 1,6mm. | 1,96/1,98 g/cm3 | 17500 MPa | 11 Kj/m2 | V0 |
Green Isofil®
Polypropylen-Verbundwerkstoff mit mineralischen Füllstoffen, der Anteile an Post-Industrie- oder Post-Consumer-Recyclingmaterial enthält. Die Produkte entsprechen den kürzlich von der Automotive- und Haushaltsgeräteindustrie eingeführt Standards.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Green Isofil® HK 40 C F | PP copo 40% calcium carbonate, heat stabilized, detergent resistant. | 20 g/10' | 1900 MPa | 3,3 Kj/m2 | Classe HB | |
Green Isofil® K 30 T T HS | 30% talc filled polypropylene copolymer. Industrial quality. Heat stabilized. | 3 g/10' | 2200 MPa | 6 Kj/m2 | Classe HB |
Dafnetherm®
Wärmeleitende Compounds auf Basis verschiedener Polymere. Je nach Kundenwunsch können verschiedene Füllstoffe zur Verbesserung der thermischen Eigenschaften hinzugefügt werden.Name | Compound | Surface Resistivity IEC 93 | Thermal conductivity ISO 22007-2 - In-Plane | Thermal conductivity ISO 22007-2 - Through-Plane | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnetherm® PPGR16 | Crystalline carbon additive, thermal conductive, electrical conductive. | 1E3 Ohm | 3 W/(m*K) | 10 W/(m*K) | HB | |
Dafnetherm® PPBN16 | Inorganic filler, thermal conductive, electrical insulating. | > 1E12 Ohm | 1,4 W/(m*K) | 9 W/(m*K) | HB |
Dafneohm®
Elektrisch leitfähige und ableitfähige Compounds auf Basis verschiedener Kunststoffe, die in einem umfassenden Typensortiment erhältlich sind. Es können verschiedene Füllstoffe oder Additive hinzugefügt werden, um die vom Kunden gewünschten leitfähigen Eigenschaften zu erreichen. Sie können nach spezifischen Kundenanforderungen eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Surface Resistivity IEC 60093 | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneohm® 6A KP06 | PA6 reinforced, electrically conductive. | 1,32/1,34 g/cm3 | 14000 MPa | 5E03 Ohm | HB | |
Dafneohm® EC CB 4 | PP electrically conductive. | 1,02 g/cm3 | 1000 MPa | 3E04 Ohm | HB | |
Dafneohm® EH K22_D | PP reinforced, electrically conductive. | 1 g/cm3 | 8000 MPa | 1E02 Ohm | HB |
Green Isoglass®
Glasfaserverstärktes Polypropylen unter teilweiser Verwendung von Rohstoffen, die aus Industrie- und Post-Consumer-Quellen stammen. Die Produkte sind in Übereinstimmung mit einigen kürzlich von der Automobil- und Haushaltsgerätebranche eingeführten Normen erhältlich.Name | Compound | MFI ISO 1133 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Green Isoglass® H 30 CGF C HS | 30% chemically coupled glass fiber reinforced polypropylene with 30% circular polymer source. Heat stabilized. | 6 g/10' | 4900 MPa | 9 Kj/m2 | Classe HB | |
Green Isoglass® H 40 CGF X HS | 40% glass fiber reinforced polypropylene. Industrial quality. Heat stabilized. | 10 g/10' | 6000 MPa | 9 Kj/m2 | Classe HB |
Dafnemid®
Compounds auf der Basis von Polyamid 6 und 66 (PA6 - PA66), mit guter Wärmebeständigkeit und guten mechanischen Eigenschaften. Unser Portfolio umfasst verschiedene Typen, die mit Glas- und Kohlefasern verstärkt oder mit Mineralstoffen gefüllt sind; schlagzäh modifiziert, Silikon-, PTFE- oder Molybdändisulfid-geschmiert; auf halogenhaltiger oder halogenfreier flammhemmender Basis, UL94 gelistet. Unsere Produkte können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnemid® 6A P06 | PA6 30% glass fiber reinforced. | 1,36 g/cm3 | 8000 MPa | 12 Kj/m2 | HB YC | |
Dafnemid® 6A MS1 | PA6 lubricated with MoS2. | 1,14 g/cm3 | 2600 MPa | 5 Kj/m2 | HB | |
Dafnemid® 6XA P04 | PA6 20% glass fiber, flame retardant UL94 V0 1,7 mm, with halogen. | 1,54 g/cm3 | 6800 MPa | 6 Kj/m2 | V0 YC - GWFI 960, GWIT 850 | |
Dafnemid® 66A K04 | PA66 20% carbon fiber. | 1,22 g/cm3 | 12000 MPa | 5 Kj/m2 | HB | |
Dafnemid® 66A MS1 | PA66 lubricated MoS2. | 1,10/1,12 g/cm3 | 2000 MPa | 7 Kj/m2 | HB | |
Dafnemid® 66A T04 | PA66 lubricated Teflon. | 1,26 g/cm3 | 2800 MPa | 4 Kj/m2 | HB | |
Dafnemid® 66XA P05/T | PA66 25% glass fiber, heat stabilized, flame ritardant UL94 V0 0,8 mm, with halogens. | 1,50/1,55 g/cm3 | 8500 MPa | 9 Kj/m2 | V0 YC - GWFI 960 - GWIT 875 - RTI 140 | |
Dafnemid® 6A | PA6 medium viscosity. | 1,13 g/cm3 | 2700 MPa | 4 Kj/m2 | V2 | |
Dafnemid® 6A P12/T | PA6 60% glass fiber, very high rigidity and strength, heat stabilized. | 1,70 g/cm3 | 19000 MPa | 16 Kj/m2 | HB |
Dafneloy® M
Polycarbonat-Compounds (PC), die eine gute Kombination aus Härte, Schlagzähigkeit und hoher Wärmebeständigkeit bieten. Unsere Produkte können glasfaserverstärkt und schlagzäh modifiziert eingestellt werden. Sie sind in puncto Flammschutz nach UL94 zertifiziert und sowohl auf halogenhaltiger als auch auf halogenfreier Basis erhältlich. Sie können nach spezifischen Kundenanforderungen eingefärbt werden und sind auch in transparenten Farben erhältlich.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafneloy® M A | PC low viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,20 g/cm3 | 20 gr/10' | 55 Kj/m2 | HB | |
Dafneloy® M B | PC medium viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,20 g/cm3 | 12 gr/10' | 65 Kj/m2 | HB | |
Dafneloy® M C | PC high viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,2 g/cm3 | 8 gr/10' | 70 Kj/m2 | HB | |
Dafneloy® M XF | PC flame retardant, halogen free, UL94 V0 1,6 mm. | 1,2 g/cm3 | 10 gr/10' | 60 Kj/m2 | V0 YC | |
Dafneloy® M XF EA | PC flame retardant, halogen free, UL94 V0 1,0 mm, impact modified. | 1,18 g/cm3 | 8 gr/10' | 70 Kj/m2 | V0 YC | |
Dafneloy® M XA P02 | PC 10% glass fiber reinforced, flame retardant, with halogens, UL94 V0 1,6 mm. | 1,26/1,30 g/cm3 | 10 gr/10' | 10 Kj/m2 | V0 YC | |
Dafneloy® M XF P02 | PC 10% glass fiber reinforced, flame retardant, halogen free, UL94 V0 1,6 mm. | 1,26/1,30 g/cm3 | 10 gr/10' | 7 Kj/m2 | V0 YC | |
Dafneloy® M A/L | PC low viscosity, good mechanical and high heat resistance, UV stabilized, for transparent and solid colors. | 1,20 g/cm3 | 20 gr/10' | 55 Kj/m2 | HB |
Isoblend®
Compounds, die in einer breiten Palette von verschiedenen Polymerlegierungen erhältlich sind. Unser Portfolio umfasst verstärkte Qualitäten, halogenhaltige oder halogenfreie flammhemmende Typen, die nach UL94 zertifiziert sind. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | Vicat B/50 ISO 306 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoblend® B 65 | Unfilled PC/ABS alloy. Natural colour. | 1,12 g/cm3 | 120 °C | 40 Kj/m2 | HB | |
Isoblend® A 45 | Blend ABS/PC general purpose, good flow properties. | 1,10 - 1,12 g/cm3 | 110 °C | 30 Kj/m2 | HB | |
Isoblend® A 65 | Blend PC/ABS general purpose, good flow properties and good impact resistance. | 1,13 - 1,15 g/cm3 | 118 °C | 35 Kj/m2 | HB | |
Isoblend® A 85 | Blend PC/ABS general purpose, good flow properties, good impact and heat resistance. | 1,15 - 1,16 g/cm3 | 129 °C | 55 Kj/m2 | HB | |
Isoblend® A 40 200 V0 | Blend PC/ABS flame retardant UL94 V0 1,5mm, halogen free. | 1,17 g/cm3 | 105 °C | 30 Kj/m2 | V0 YC | |
Isoblend® A 65 AF UV | Blend PC/ABS, high fluidity, UV stabilized. | 1,12 g/cm3 | 118 °C | 30 KJ/m2 | HB | |
Isoblend® A 85 AF UV | Blend PC/ABS, high fluidity, UV stabilized. | 1,15 g/cm3 | 129 °C | 50 KJ/m2 | HB | |
Isoblend® A65 GF20 | Blend PC/ABS 20% glass fiber reinforced. | 1,29 g/cm3 | 130 °C | 9 KJ/m2 | HB | |
Isoblend® A65 GF17 | Blend PC/ABS, 17% glass fiber reinforced. | 1,29 g/cm3 | 127 °C | 10 KJ/m2 | HB | |
Isoblend® A 45 PG | Blend ABS/PC, suitable for electroplating application. | 1,08 g/cm3 | 110 °C | 45 KJ/m2 | HB | |
Isoblend® A 65 PG | Blend PC/ABS, suitable for electroplating application. | 1,11 g/cm3 | 126 °C | 50 KJ/m2 | HB | |
Isoblend® A 20 500 V0 | Blend PC/ABS flame retardant UL94 V0 1,5mm, halogen free. | 1,17 g/cm3 | 110 °C | 50 KJ/m2 | V0 YC | |
Isoblend® A 50 UV | Blend PC/ABS, UV stabilized. | 1,12 g/cm3 | 120 °C | 50 KJ/m2 | HB |
Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoblend® AS 15 15 UV | Blend PC/ASA good UV and weathering resistance, high heat resistance, good impact strength. | 1,13 - 1,16 g/cm3 | 15 gr/10' | 20 Kj/m2 | HB | |
Isoblend® AS 15 15 V0 UV | Blend PC/ASA flame retardant UL94 V0 3,00mm, UV resistance. | 1,17 g/cm3 | 13 gr/10' | 15 Kj/m2 | V0 |
Isoform®
Compounds auf Basis von copolymerem oder homopolymerem Polyoxymethylen (POM) mit hoher Steifigkeit und hervorragender Verschleißfestigkeit. Unsere Produkte sind glasfaserverstärkt, schlagzäh modifiziert und Silikon-, PTFE- oder Molybdändisulfid-geschmiert erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoform® A K 03 | POM COP general purpose, high viscosity. | 1,41 g/cm3 | 3 gr/10' | 8 Kj/m2 | HB | |
Isoform® A K 09 | POM COP general purpose, medium viscosity. | 1,41 g/cm3 | 9 gr/10' | 7 Kj/m2 | HB | |
Isoform® A K 13 | POM COP general purpose, medium viscosity. | 1,41 g/cm3 | 13 gr/10' | 6 Kj/m2 | HB | |
Isoform® A K 27 | POM COP general purpose, low viscosity. | 1,41 g/cm3 | 27 gr/10' | 6 Kj/m2 | HB | |
Isoform® A K 45 | POM COP general purpose, very low viscosity. | 1,41 g/cm3 | 45 gr/10' | 4 Kj/m2 | HB | |
Isoform® A K 09 GF25 | POM COP 25% glass fiber. | 1,59 g/cm3 | 4 gr/10' | 6 Kj/m2 | HB | |
Isoform® A K 09 STZ | POM COP impact modified. | 1,37 g/cm3 | 11 gr/10' | 15 Kj/m2 | HB |
Isoryl®
Polyphenylenoxid (PPO) Compounds mit hoher Wärmebeständigkeit, guter Dimensionsstabilität und Hydrolysebeständigkeit. Die Produkte können mit Glasfaserverstärkung oder Mineralstofffüllung eingestellt werden; halogenfrei flammhemmend und UL94 zertifiziert. Sie können nach spezifischen Kundenanforderungen eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoryl® A 137 | PPO Unfilled. | 1,06 g/cm3 | 2100 MPa | 10 Kj/m2 | HB | |
Isoryl® A 20 90 GF20 W | PPO 20% glass fiber, WRAS approved. | 1,21 g/cm3 | 4500 MPa | 3 Kj/m2 | HB | |
Isoryl® A 20 10 GF30 W | PPO 30% glass fiber, WRAS approved. | 1,27 g/cm3 | 6000 MPa | 3 Kj/m2 | HB | |
Isoryl® A 20 75 GF20 V0 | PPO 20% glass fiber, flame retardant UL94 V0 3,00mm. | 1,24 g/cm3 | 4500 MPa | 3 Kj/m2 | V0 | |
Isoryl® A 120 T20 V1 A | PPO 20% mineral filled, flame retartant UL94 V1 1,5mm. | 1,21 g/cm3 | 3600 MPa | 5 Kj/m2 | V1 YC | |
Isoryl® A 120 GF0 V0 | PPO flame retardant UL94 V0 1,5mm. | 1,10 g/cm3 | 2250 MPa | 9 Kj/m2 | V0 YC |
Dafnestil®
Styrol-Compound (PS), das in verschiedenen Qualitäten, Schlagzähigkeiten und Wärmebeständigkeiten gemäß den Industrienormen für Haushaltsgeräte und den Elektromarkt erhältlich ist. Einige Produkte sind mit halogenbasierten Flammschutzmitteln erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Dafnestil® KU | GPPS good fluidity and good heat resistance. | 1,05 g/cm3 | 10 gr/10' | 1,7 Kj/m2 | HB | |
Dafnestil® AM | HIPS medium impact, good heat resistance and high stiffness. | 1,04 g/cm3 | 10 gr/10' | 5 Kj/m2 | HB | |
Dafnestil® AT | HIPS high impact, heat resistant and high stiffness. | 1,04 g/cm3 | 5 gr/10' | 6 Kj/m2 | HB | |
Dafnestil® AXR | HIPS high impact, flame retardant UL94 V0 1,6mm - GWFI 960 2,00mm. | 1,14/1,18 g/cm3 | 10 gr/10' | 6 Kj/m2 | V0 - GWFI 960 | |
Dafnestil® AXB | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 850 1,00mm. | 1,10/1,12 g/cm3 | 12 gr/10' | 6 Kj/m2 | V2 1,6mm - GWFI 850 | |
Dafnestil® AXE | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 960 1,00mm. | 1,17 g/cm3 | 6 gr/10' | 5 Kj/m2 | V2 1,6mm - GWFI 960 | |
Dafnestil® AXF | HIPS high impact, flame retardant UL94 V2 1,6mm - GWFI 750 1,00mm. | 1,14/1,17 g/cm3 | 7 gr/10' | 5 Kj/m2 | V2 1,6mm - GWFI 750 |
Isonyl®
Compounds auf der Basis von Polyamid 6 und 66 (PA6 - PA66), mit guter Wärmebeständigkeit und guten mechanischen Eigenschaften. Unser Portfolio umfasst verschiedene Typen, die mit Glas- und Kohlefasern verstärkt oder mit Mineralstoffen gefüllt sind; schlagzäh modifiziert, Silikon-, PTFE- oder Molybdändisulfid-geschmiert; auf halogenhaltiger oder halogenfreier flammhemmender Basis, UL94 gelistet. Unsere Produkte können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isonyl® A 6 | PA6 general purpose for injection moulding. | 1,13 g/cm3 | 2700 MPa | 4 Kj/m2 | V2 | |
Isonyl® A 6 ST | PA6 impact modified. | 1,13 g/cm3 | 2400 MPa | 8 Kj/m2 | HB | |
Isonyl® A 6 ST1 | PA6 impact modified. | 1,12 g/cm3 | 2300 MPa | 20 Kj/m2 | HB | |
Isonyl® A 6 ST2 | PA6 impact modified. | 1,11 g/cm3 | 2000 MPa | 30 Kj/m2 | HB | |
Isonyl® A 6 STZ | PA6 impact modified. | 1,10 g/cm3 | 1800 MPa | 40 Kj/m2 | HB | |
Isonyl® A 6 STZX | PA6 high impact modified. | 1,08 g/cm3 | 1600 MPa | 70 Kj/m2 | HB | |
Isonyl® A 6 GF15 | PA6 15% glass fiber reinforced. | 1,21 g/cm3 | 6000 MPa | 7 Kj/m2 | HB | |
Isonyl® A 6 GF50 | PA6 50% glass fiber reinforced. | 1,56 g/cm3 | 12000 MPa | 13 Kj/m2 | HB | |
Isonyl® A 6 GF60 | PA6 60% glass fiber reinforced. | 1,70 g/cm3 | 19000 MPa | 16 Kj/m2 | HB | |
Isonyl® A 6 GS30 | PA6 30% glass beads reinforced. | 1,34 - 1,36 g/cm3 | 3150 MPa | 3 Kj/m2 | HB | |
Isonyl® 6 GF30 V0 HF | PA6 30% glass fiber, flame retardant UL94 V0 1,5 mm, halogen free. | 1,41 g/cm3 | 9000 MPa | 6 Kj/m2 | V0 YC | |
Isonyl® A 66 | PA66 general purpose for injection moulding. | 1,14 g/cm3 | 2900 MPa | 4 Kj/m2 | V2 | |
Isonyl® A 66 ST | PA66 impact modified. | 1,13 g/cm3 | 2500 MPa | 9 Kj/m2 | HB | |
Isonyl® A 66 ST1 | PA66 impact modified. | 1,12 g/cm3 | 2400 MPa | 20 Kj/m2 | HB | |
Isonyl® A 66 ST2 | PA66 impact modified. | 1,11 g/cm3 | 2200 MPa | 30 Kj/m2 | HB | |
Isonyl® A 66 STZ | PA66 impact modified. | 1,10 g/cm3 | 2000 MPa | 40 Kj/m2 | HB | |
Isonyl® A 66 STZX | PA66 high impact modified. | 1,08 g/cm3 | 1800 MPa | 65 Kj/m2 | HB | |
Isonyl® A 66 GF30 | PA66 30% glass fiber reinforced. | 1,36 g/cm3 | 8500 MPa | 12 Kj/m2 | HB | |
Isonyl® A 66 GF50 | PA66 50% glass fiber reinforced. | 1,56 g/cm3 | 14000 MPa | 13 Kj/m2 | HB | |
Isonyl® A 66 GF25 V0 | PA66 25% glass fiber, flame retardant UL94 V0 1,5 mm, with halogens. | 1,50/1,55 g/cm3 | 8500 MPa | 9 Kj/m2 | V0 | |
Isonyl® A 6 GF30 | PA 6 30% glass fiber reinforced. | 1,36 g/cm3 | 8000 Mpa | 12 Kj/m2 | HB | |
Isonyl® A 6 GF30 ST2 | PA6 30% glass fiber reinforced, impact modified. | 1,32 g/cm3 | 6800 Mpa | 17 Kj/m2 | HB | |
Isonyl® A 6 GF30 HSR | PA6 30% glass fiber reincorced, good impact resistance, heat and hydrolysis resistant. | 1,36 g/cm3 | 8000 Mpa | 12 Kj/m2 | HB | |
Isonyl® A 6 GF35 | PA6 35% glass fiber reinforced. | 1,38 - 1,41 g/cm3 | 9000 Mpa | 15 KJ/m2 | HB | |
Isonyl® A 6 GF30 ST | PA6 30% glass fiber reinforced, impact modified. | 1,34 g/cm3 | 7300 Mpa | 14 KJ/m2 | HB |
Green Isonyl®
Polyamid 6 mit Glasfaserverstärkung, unter teilweiser Verwendung von Post-Industrial-Compound und recyceltem Ausgangsmaterial Die Produkte sind in Übereinstimmung mit einigen kürzlich von der Automobil- und Werkzeugbranche eingeführten Normen in Schwarz erhältlich.Name | Compound | Density ISO 1183 | MEF ISO 178 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Green Isonyl® I 66 GF25 GW | 25% glass fiber reinforced polyamide 66. Flame retardant grade with GWFI 850°C on 2 mm thickness. Recycled content. | / | 7500 MPa | 7 KJ/m2 | / |
Isoter®
Styrol-Compounds (ABS-SAN-ASA), erhältlich in verschiedenen Qualitäten mit einem breiten Spektrum an Schmelzflussraten, Schlagzähigkeiten und Wärmebeständigkeiten, entsprechend den Marktanforderungen und Industriestandards. Einige Produkte sind glasfaserverstärkt, in der Klasse HB und halogenbasiert flammhemmend mit UL94-Zertifizierung erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden, und hohen oder niedrigen Glanz aufweisen.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoter® A 20 180 | ABS medium flow, general purposes, good impact resistance. | 1,04 g/cm3 | 20 gr/10' | 17 Kj/m2 | HB | |
Isoter® A 35 200 | ABS high flow, general purpose, good impact resistance. | 1,04 g/cm3 | 35 gr/10' | 16 Kj/m2 | HB | |
Isoter® A 15 250 AS | ABS medium flow, improved chemical resistance. | 1,04 g/cm3 | 20 gr/10' | 24 Kj/m2 | HB | |
Isoter® A 10 120 HT | ABS with high heat resistance Vicat B/50 102°C | 1,05 g/cm3 | 10 gr/10' | 12 Kj/m2 | HB | |
Isoter® A 10 150 HT | ABS with high heat resistance Vicat B/50 105°C. | 1,05 g/cm3 | 10 gr/10' | 12 Kj/m2 | HB | |
Isoter® A 5 150 HT LE | ABS very high heat resistance Vicat B/50 108°C, low emission. | 1,05 g/cm3 | 6 gr/10' | 18 Kj/m2 | HB | |
Isoter® A 30 200 FR V0 | ABS flame retardant, UL94 V0 1,5mm. | 1,20 g/cm3 | 30 gr/10' | 20 Kj/m2 | V0 YC | |
Isoter® A 10 100 GF17 | ABS 17% glass fiber reinforced. | 1,18 g/cm3 | 10 gr/10' | 6 Kj/m2 | HB |
Isoclear®
Polycarbonat-Compounds (PC), die eine gute Kombination aus Härte, Schlagzähigkeit und hoher Wärmebeständigkeit bieten. Unsere Produkte können glasfaserverstärkt und schlagzäh modifiziert eingestellt werden. Sie sind in puncto Flammschutz nach UL94 zertifiziert und sowohl auf halogenhaltiger als auch auf halogenfreier Basis erhältlich. Sie können nach spezifischen Kundenanforderungen eingefärbt werden und sind auch in transparenten Farben erhältlich.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isoclear® A 20 60 | PC low viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,2 g/cm3 | 20 gr/10' | 60 Kj/m2 | HB | |
Isoclear® A 10 60 | PC medium viscosity, good mechanical and high heat resistance, for transparent and solid colors. | 1,2 g/cm3 | 10 gr/10' | 60 Kj/m2 | HB | |
Isoclear® A 10 60 GF0 V0 | PC flame retardant, with halogens, UL94 V0 1,6 mm. | 1,20 g/cm3 | 10 gr/10' | 50 Kj/m2 | V0 YC | |
Isoclear® A 10 60 GF10 V0 | PC 10% glass fiber reinforced, flame retardant, with halogens, UL94 V0 1,6 mm. | 1,26 - 1,30 g/cm3 | 10 gr/10' | 7 Kj/m2 | V0 YC |
Isostyr®
Styrol-Compound (PS), das in verschiedenen Qualitäten, Schlagzähigkeiten und Wärmebeständigkeiten gemäß den Industrienormen für Haushaltsgeräte und den Elektromarkt erhältlich ist. Einige Produkte sind mit halogenbasierten Flammschutzmitteln erhältlich. Sie können je nach den spezifischen Kundenanforderungen entsprechend eingefärbt werden.Name | Compound | Density ISO 1183 | MFI ISO 1133 | Izod Notched ISO 180/1A | Flammability UL94 | |
---|---|---|---|---|---|---|
Isostyr® A 10 50 | HIPS medium impact, good heat resistance and high stiffness. | 1,04 g/cm3 | 10 gr/10' | 5 Kj/m2 | HB | |
Isostyr® A 10 100 V2 | HIPS flame retardant UL94 V2 1,5 mm. | 1,13 g/cm3 | 20 gr/10' | 7 Kj/m2 | V2 |