Engineering Plastics Compounds

Filters

Filter Reset
Isodur<sup>®</sup>

Isodur®

Compound based on different Polyesters and special alloys with wide viscosity range. The products are usually glass fiber reinforced, impact modified, UV stabilized and colored upon specific customer requirement. Availability of flame retardant grades with registered UL certification.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Densità

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISODUR A 15 10 GF20PBT 20% glass
fiber reinforced		1,45 g/cm35500 MPa7 Kj/m2Classe HBDownload TDS
ISODUR A 15 10 GF30PBT 30% glass
fiber reinforced		1,56 g/cm38500 MPa8 Kj/m2Classe HBDownload TDS
ISODUR A 15 10 GF20 V0PBT 20% glass
fiber reinforced,
flame retardant
UL94 V0 1,5mm		1,57/1,59 g/cm37000 MPa7 Kj/m2Classe V0Download TDS
ISODUR A 15 10 GF30 V0PBT 20% glass
fiber reinforced,
flame retardant
UL94 V0 1,5mm		1,65 g/cm39500 MPa8 Kj/m2Classe V0Download TDS
Dafneloy<sup>®</sup> V

Dafneloy® V

Compound based on different Polyesters and special alloys with wide viscosity range. The products are usually glass fiber reinforced, impact modified, UV stabilized and colored upon specific customer requirement. Availability of flame retardant grades with registered UL certification.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Densità

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNELOY VB P03PBT 15% glass fiber,
high gloss for aestetic parts		1,41/1,44 g/cm345003 Kj/m2Classe HBDownload TDS
DAFNELOY VB P06PBT 30% glass fiber reinforced1,56 g/cm385008 Kj/m2Classe HBDownload TDS
DAFNELOY VXA P06PBT 30% glass fiber reinforced,
flame retardant
UL94 V0 1,7mm		1,65 g/cm395008 Kj/m2Classe V0Download TDS
Dafneloy<sup>®</sup> D

Dafneloy® D

Acrylic Thermoplastic Compound with a wide viscosity range and impact modified. Product available on transparent colored upon specific customer requirement.
  • Unfilled
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNELOY DA8

PMMA medium flow,
high mechanical

strength,
for transparent
and solid colors 

1,16/1,18 g/cm37 gr/10min2 Kj/m2Classe HBDownload TDS
DAFNELOY DA9

PMMA low flow,
high mechanical

strength,
for transparent
and solid colors

1,16/1,18 g/cm33 gr/10min2 Kj/m2Classe HBDownload TDS
DAFNELOY DHPMMA good
impact resistance 		1,16 g/cm31,5 gr/10min6 Kj/m2Classe HBDownload TDS
Isoblend<sup>®</sup>

Isoblend®

Polymer Alloys Compound produced on different base resins combination. The range of products includes glass fiber or carbon fiber reinforcement, UV stabilization and high impact performance; the products may be colored upon specific customer requirement. Halogen based or halogen-free flame retardant with registered UL certification.
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

Vicat B/50 

ISO 306

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISOBLEND A 45Blend PC/ABS
general purpose,
good flow properties 		1,10/1,12 g/cm3110 °C30 Kj/m2Classe HBDownload TDS
ISOBLEND A 65Blend PC/ABS
general purpose,
good flow properties and
good impact resistance		1,13/1,15 g/cm3118 °C35 Kj/m2Classe HBDownload TDS
ISOBLEND A 85Blend PC/ABS
general purpose,
good flow properties,
good impact and
heat resistance		1,15/1,16 g/cm3129 °C55 Kj/m2Classe HBDownload TDS
ISOBLEND A 65 GF20Blend PC/ABS
20% glass
fiber reinforced		1,29 g/cm3130 °C9 Kj/m2Classe HBDownload TDS
ISOBLEND A 20 500 V0Blend PC/ABS
flame retardant
UL94 V0 1,5mm,
halogen free		1,17 g/cm3110 °C50 Kj/m2Classe V0Download TDS
ISOBLEND A 40 200 V0Blend PC/ABS
flame retardant
UL94 V0 1,5mm,
halogen free		1,17 g/cm3105 °C50 Kj/m2Classe V0Download TDS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISOBLEND AS 15 15 UVBlend PC/ASA
good UV and
weathering resistance,
high heat resistance,
good impact strength		1,13/1,16 g/cm315 gr/10min15 Kj/m2Classe HBDownload TDS
ISOBLEND AS 15 15 V0 UVBlend PC/ASA
flame retardant
UL94 V0 3,00 mm,
UV resistance 		1,17 g/cm313 gr/10min17 Kj/m2Classe V0Download TDS
Dafneblend<sup>®</sup>

Dafneblend®

Polymer Alloys Compound produced on different base resins combination. The range of products includes glass fiber or carbon fiber reinforcement, UV stabilization and high impact performance; the products may be colored upon specific customer requirement. Halogen based or halogen-free flame retardant with registered UL certification.
  • Unfilled
Technical data
NameCompound

Density

ISO 1183

Vicat B/50 

ISO 306

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNEBLEND
PM 200		Blend PC/ABS general purpose,
good flow properties 		1,10/1,12 g/cm3110 °C30 Kj/m2Classe HBDownload TDS
DAFNEBLEND
PM 500		Blend PC/ABS general purpose,
good flow properties and good
impact resistance		1,13/1,15 g/cm3118 °C35 Kj/m2Classe HBDownload TDS
DAFNEBLEND
PM 700		Blend PC/ABS general purpose,
good flow properties, good impact
and heat resistance		1,15/1,16 g/cm3129 °C55 Kj/m2Classe HBDownload TDS
DAFNEBLEND 
PM 700XF		Blend PC/ABS flame retardant
UL94 V0 1,5 mm, halogen free		1,18 g/cm3108 °C40 Kj/m2Classe V0Download TDS
DAFNEBLEND 
PM 750XF		Blend PC/ABS flame retardant
UL94 V0 1,5mm, halogen free,
ball pressure test 125°C 		1,16 g/cm3130 °C50 Kj/m2Classe V0Download TDS

 

 

NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNEBLEND
PK 201		Blend PA/ABS good mechanical
properties, good chemical resistance		1,07 g/cm330 gr/10min60 Kj/m2Classe HBDownload TDS
DAFNEBLEND 
PK 202		Blend PA/ABS  high flowability and
good mechanical properties,
good chemical resistance		1,06 g/cm355 gr/10min50 Kj/m2Classe HBDownload TDS

 

NameCompound

Density

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNEBLEND
PL 200/E		Blend PC/ABS general purpose,
good flow properties 		1,22 g/cm32200 MPa50 Kj/m2Classe HBDownload TDS
DAFNEBLEND
PL 300/EC		Blend PC/ABS general purpose,
good flow properties and good
impact resistance		1,18 g/cm31600 MPa60 Kj/m2Classe HBDownload TDS
DAFNEBLEND
PL 706		Blend PC/ABS general purpose,
good flow properties, good impact
and heat resistance		1,47/1,49 g/cm38000 MPa10 Kj/m2Classe HBDownload TDS

 

 

 

NomeCompound

Densità

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNEBLEND
PX 200 L		Blend PC/ASA good UV and weathering
resistance, good impact strength 		1,10/1,13 g/cm312 gr/10min40 Kj/m2Classe HBDownload TDS
DAFNEBLEND
PX 500 L		Blend PC/ASA good UV and weathering
resistance, high heat resistance,
good impact strength		1,13/1,16 g/cm320 gr/10min40 Kj/m2Classe HBDownload TDS
Isoform<sup>®</sup>

Isoform®

Copolymer and Homopolymer acetal resin with a wide melt flow range and impact modified. Glass fiber reinforced, glass beads or mineral filled. Modified with Silicon, PTFE or molybdenum disulfide to improve lubrication. Natural or colored upon specific customer requirement.
  • Unfilled -
  • Mineral Filled -
  • Glass Fiber Reinforced
Technical data
NomeCompound

Densità

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Infiammabilità

UL94

 
ISOFORM A K 03POM COP general purpose,
high viscosity		1,41 g/cm33 gr/10min8 Kj/m2Classe HBDownload TDS
ISOFORM A K 09POM COP general purpose,
medium viscosity		1,41 g/cm39 gr/10min7 Kj/m2Classe HBDownload TDS
ISOFORM A K 13POM COP general purpose,
medium viscosity		1,41 g/cm313 gr/10min6 Kj/m2Classe HBDownload TDS
ISOFORM A K 27POM COP general purpose,
low viscosity		1,41 g/cm327 gr/10min6 Kj/m2Classe HBDownload TDS
ISOFORM A K 45 POM COP general purpose,
very low viscosity		1,41 g/cm345 gr/10min4 Kj/m2Classe HBDownload TDS
ISOFORM A K 09
GF25		POM COP 25% glass fiber 1,59 g/cm34 gr/10min6 Kj/m2Classe HBDownload TDS
ISOFORM A K 09
STZ		POM COP impact modified 1,37 g/cm311 gr/10min15 Kj/m2Classe HBDownload TDS
       
Dafnelan<sup>®</sup>

Dafnelan®

Copolymer and Homopolymer acetal resin with a wide melt flow range and impact modified. Glass fiber reinforced, glass beads or mineral filled. Modified with Silicon, PTFE or molybdenum disulfide to improve lubrication. Natural or colored upon specific customer requirement.
  • Unfilled -
  • Mineral Filled -
  • Glass Fiber Reinforced
Technical data
NomeCompound

Densità

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Infiammabilità

UL94

 
DAFNELAN GR9 T02POM COP PTFE modified1,45 g/cm39 gr/10min5 Kj/m2Classe HBDownload TDS
DAFNELAN GR9 T04POM COP PTFE modified1,48/1,50 g/cm39 gr/10min5 Kj/m2Classe HBDownload TDS
DAFNELAN GR9 MS1POM COP lubricated MoS21,4 g/cm310 gr/10min6 Kj/m2Classe HBDownload TDS
DAFNELAN LR2POM OMO general purpose,
high viscosity		1,42 g/cm32 gr/10min15 Kj/m2Classe HBDownload TDS
DAFNELAN LR12POM OMO general purpose,
medium viscosity		1,4 g/cm312 gr/10min9 Kj/m2Classe HBDownload TDS
DAFNELAN LR9
P03/E		POM OMO medium viscosity,
15% glass fiber, high stiffness,
low warpage		1,5 g/cm38 gr/10min5 Kj/m2Classe HBDownload TDS
       
Isoryl<sup>®</sup>

Isoryl®

Modified Poly-Ethilene-Ether Compound with a wide melt flow range and performing high thermal resistance. The product is normally reinforced with glass fiber and colored upon specific customer requirement. Halogen based or halogen-free flame retardant with registered UL certification.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISORYL A 137PPO Unfilled1,06 g/cm32100 MPa10 Kj/m2Classe HBDownload TDS
ISORYL A 20 90 GF20 WPPO 20% glass fiber, WRAS approved1,21 g/cm34500 MPa25 Kj/m2Classe HBDownload TDS
ISORYL A 20 10 GF30 WPPO 30% glass fiber, WRAS approved1,27 g/cm36000 MPa26 Kj/m2Classe HBDownload TDS
ISORYL A 20 75 GF20 V0PPO 20% glass fiber, flame retardant
UL94 V0 3,00mm		1,24 g/cm34500 MPa25 Kj/m2Classe V0Download TDS
ISORYL A 120 GF0 V0PPO flame retardant UL94 V0 1,5 mm1,1 g/cm32250 MPa9 Kj/m2Classe V0Download TDS
ISORYL A 120 T20 V1 APPO 20% mineral filled, flame retartant
UL94 V1 1,5mm		1,21 g/cm33600 MPa5 Kj/m2Classe V1Download TDS
Dafnetec<sup>®</sup>

Dafnetec®

High Performance Engineering Compound with a wide range of properties. Glass fiber or carbon fiber reinforced with improved impact resistance. Natural and colored upon specific customer requirement.
  • Glass Fiber Reinforced -
  • Carbon Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNETEC PPS P08PPS 40% glass fiber, flame
retardante UL94 V0 1,6mm		1,66/1,68 g/cm315200 MPa10 Kj/m2Classe V0Download TDS
DAFNETEC PPS G12PPS glass fiber and mineral filler,
flame retardante UL94 V0 1,6mm		1,96/1,98 g/cm317500 MPa11 Kj/m2Classe V0Download TDS
Dafnetherm<sup>®</sup>

Dafnetherm®

Thermal conductive compound based on different resins available in a wide products range.
Technical data
NomeCompound

Surface resistivity

IEC 93

Thermal Conductivity

ISO 22007-2
In aereo

Thermal Conductivity

ISO 22007-2
Attraverso l'aereo

Flamability

UL94

 
DAFNETHERM PPGR16Crystalline carbon additive,
thermal conductive, electrical conductive		1E03 Ohm10 W/mK3 W/mKClasse HBDownload TDS
DAFNETHERM PPBN16Inorganic filler, thermal
conductive, electrical insulating 		>1E12 Ohm9 W/mK1,4 W/mKClasse HBDownload TDS

 

 

 

 

 

 

 

 

 

Dafneohm<sup>®</sup>

Dafneohm®

Electrical conductive compound based on different resins available in a wide products range.
  • Unfilled -
  • Mineral Filled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MEF 

ISO 178

Surface resistivity

IEC 60093

Flamability

UL94

 
DAFNEOHM 6A KP06PA6 reinforced,
electrically conductive 		1,32/1,34 g/cm314000 MPa5E03 OhmClasse HBDownload TDS
DAFNEOHM EC EB 4PP  electrically conductive 1,02 g/cm31000 MPa3E04 OhmClasse HBDownload TDS
DAFNEOHM EH K22_DPP reinforced, electrically
conductive		1 g/cm38000 MPa1E02 OhmClasse HBDownload TDS

 

 

 

 

 

 

 

 

 

 

Isonyl<sup>®</sup>

Isonyl®

Polyamide 6 and 66, 66/6 Copolymer, PPA, with heat resistance and impact modified with a wide viscosity range. Glass fiber or carbon fiber reinforced. Glass sphere or mineral filled. Natural and colored upon specific customer requirement. Halogen based or halogen-free flame retardant with registered UL certification.
  • Glass Fiber Reinforced -
  • Carbon Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISONYL A 6PA6 general purpose
for injection moulding		1,13 g/cm32700 MPa4 Kj/m2Classe V2Download TDS
ISONYL A 6 STPA6 impact modified 1,13 g/cm32400 MPa8 Kj/m2Classe HBDownload TDS
ISONYL A 6 ST1PA6 impact modified 1,12 g/cm32300 MPa20 Kj/m2Classe HBDownload TDS
ISONYL A 6 ST2PA6 impact modified 1,11 g/cm32000 MPa30 Kj/m2Classe HBDownload TDS
ISONYL A 6 STZPA6 impact modified 1,10 g/cm31800 MPa40 Kj/m2Classe HBDownload TDS
ISONYL A 6 STZXPA6 high impact modified1,08 g/cm31600 MPa70 Kj/m2Classe HBDownload TDS
ISONYL A 6 GF15PA6 15% glass fiber reinforced 1,21 g/cm36000 MPa7 Kj/m2Classe HBDownload TDS
ISONYL A 6 GF30PA6 30% glass fiber reinforced 1,36 g/cm38000 MPa12 Kj/m2Classe HBDownload TDS
ISONYL A 6 GF50PA6 50% glass fiber reinforced 1,56 g/cm312000 MPa13 Kj/m2Classe HBDownload TDS
ISONYL A 6 GF60PA6 60% glass fiber reinforced 1,7 g/cm319500 MPa18 Kj/m2Classe HBDownload TDS
ISONYL A 6 GS30PA6 30% glass beads reinforced1,34/1,36 g/cm33150 MPa3 Kj/m2Classe HBDownload TDS
ISONYL A 6 GF30
V0 HF		PA6 30% glass fiber, flame retardant
UL94 V0 1,5 mm, halogen free		1,41 g/cm39000 MPa6 Kj/m2Classe V0Download TDS
ISONYL B 6
GF30 NA		PA 6, near prime, 30% glass
fiber reinforced, natural		1,36 g/cm37500 MPa10 Kj/m2Classe HBDownload TDS
ISONYL I 6
GF30 BK		PA 6, industrial grade, 30% glass
fiber reinforced, black		1,36 g/cm36000 MPa9 Kj/m2Classe HBDownload TDS
ISONYL B 66
GF30 NA		PA 66, near prime, 30% glass
fiber reinforced, natural		1,36 g/cm38000 MPa10 Kj/m2Classe HBDownload TDS
ISONYL I 66
GF30 BK		PA 66, industrial grade, 30%
glass fiber reinforced, black		1,36 g/cm36500 MPa9 Kj/m2Classe HBDownload TDS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dafnemid<sup>®</sup>

Dafnemid®

Polyamide 6 and 66, 66/6 Copolymer, PPA, with heat resistance and impact modified with a wide viscosity range. Glass fiber or carbon fiber reinforced. Glass sphere or mineral filled. Natural and colored upon specific customer requirement. Halogen based or halogen-free flame retardant with registered UL certification.
  • Glass Fiber Reinforced -
  • Carbon Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MEF 

ISO 178

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNEMID 6A P06 PA6 30% glass fiber reinforced 1,36 g/cm38000 MPa12 Kj/m2Classe HBDownload TDS
DAFNEMID 6A MS1PA6 lubricated with MoS21,14 g/cm32600 MPa5 Kj/m2Classe HBDownload TDS
DAFNEMID 6XA P04PA6 20% glass fiber, flame retardant
UL94 V0 1,7 mm, with halogen 		1,54 g/cm36800 MPa6 Kj/m2Classe V0
GWFI 960, GWIT 850		Download TDS
DAFNEMID 66A K04 PA66 20% carbon fiber1,22 g/cm312000 MPa5 Kj/m2Classe HBDownload TDS
DAFNEMID 66A MS1PA66 lubricated  MoS21,10/1,12 g/cm32000 MPa7 Kj/m2Classe HBDownload TDS
DAFNEMID 66A T04PA66 lubricated Teflon1,26 g/cm32800 MPa4 Kj/m2Classe HBDownload TDS
DAFNEMID 66XA P05/TPA66 25% glass fiber,
heat stabilized, flame ritardant
UL94 V0 0,8 mm, with halogens		1,50/1,55 g/cm38500 MPa9 Kj/m2

Classe V0, GWFI 960
GWIT 875, RTI 140

Download TDS

 

 

 

 

Green Isonyl<sup>®</sup>

Green Isonyl®

Polyamide 6 with Glass Fiber reinforcement formulated with partial use of post-industrial compound and recycled feedstocks. The products are available in accordance with some standards recently introduced by the automotive and tools sectors in black colors.
Isoclear<sup>®</sup>

Isoclear®

Compound di policarbonato con diverse fluidità. Prodotti rinforzati con fibre di vetro, modificati all’impatto, stabilizzati UV e colorati a seconda delle specifiche richieste del cliente. Disponibili autoestinguenti alogenati o esente alogeni con certificazione UL.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISOCLEAR A
20 60

PC low viscosity, good mechanical and

high heat resistance, for transparent

and solid colors

1,2 g/cm320 gr/10min60 Kj/m2Classe HBDownload TDS
ISOCLEAR A
10 60		PC medium viscosity, good mechanical and
high heat resistance, for transparent
and solid colors		1,2 g/cm310 gr/10min60 Kj/m2Classe HBDownload TDS
ISOCLEAR A
10 60 GF0 V0		PC flame retardant, with halogens,
UL94 V0 1,6 mm		1,2 g/cm310 gr/10min60 Kj/m2Classe V0Download TDS
ISOCLEAR A
10 60 GF10 V0		PC flame retardant, with halogens,
UL94 V0 1,6 mm, 10% glass fiber reinforced		1,26/1,30 g/cm310 gr/10min7 Kj/m2Classe V0Download TDS

 

Dafneloy<sup>®</sup> M

Dafneloy® M

Polycarbonate Compound with a wide MFI range. The products may be glass fiber reinforced, impact modified, UV stabilized and colored upon specific customer requirement. Halogen based or halogen-free flame retardant. Registered UL certification available.
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNELOY MAPC low viscosity, good mechanical and
high heat resistance, for transparent
and solid colors		1,2 g/cm320 gr/10min55 Kj/m2Classe HBDownload TDS
DAFNELOY MBPC medium viscosity, good mechanical and
high heat resistance, for transparent and
solid colors		1,2 g/cm312 gr/10min65 Kj/m2Classe HBDownload TDS
DAFNELOY MCPC high viscosity, good mechanical and
high heat resistance, for transparent
and solid colors		1,2 g/cm38 gr/10min70 Kj/m2Classe HBDownload TDS
DAFNELOY MXFPC flame retardant, halogen free,
UL94 V0 1,6 mm		1,2 g/cm310 gr/10min60 Kj/m2Classe V0Download TDS
DAFNELOY MXF EAPC flame retardant, halogen free,
UL94 V0 1,0 mm, impact modified		1,18 g/cm38 gr/10min70 Kj/m2Classe V0Download TDS
DAFNELOY MXA P02PC flame retardant, with halogens,
UL94 V0 1,6 mm, 10% glass fiber reinforced		1,26/1,30 g/cm310 gr/10min10 Kj/m2Classe V0Download TDS
DAFNELOY MXF P02PC flame retardant, halogen free,
UL94 V0 1,6 mm, 10% glass fiber reinforced		1,26/1,30 g/cm310 gr/10min7 Kj/m2Classe V0Download TDS
Dafnemaster<sup>®</sup>

Dafnemaster®

Masterbatch and combi-batch produced on different polymeric carrier, combined with additive packages to guaramtee color performance and acheivement of the properties indicated by the industry standards. Service activities to support customers using products with the use of high quality pigments and a dedicated and innovative production processes.
  • Unfilled
Technical data
NomeCompound

Densità

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Infiammabilità

UL94

 
      Download TDS
      Download TDS
Isoter<sup>®</sup>

Isoter®

Styrenic Compound with a wide melt flow rate range, impact modified and heat resistance. The products are available also glass fiber reinforced and colored with matt or high gloss surface, upon specific customer requirement. Halogen based flame retardant. UL certified.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISOTER A 20 180ABS medium flow,
general purposes,
good impact resistance		1,04 g/cm320 gr/10min17 Kj/m2Classe HBDownload TDS
ISOTER A 35 200 ABS high flow,
general purpose,
good impact resistance		1,04 g/cm335 gr/10min16 Kj/m2Classe HBDownload TDS
ISOTER A 15 250 AS ABS medium flow,
improved chemical resistance		1,04 g/cm320 gr/10min24 Kj/m2Classe HBDownload TDS
ISOTER A 10 100 GF17ABS  17% glass fiber reinforced1,18 g/cm310 gr/10min6 Kj/m2Classe HBDownload TDS
ISOTER A 10 120 HTABS with high
heat resistance
Vicat B/50 102°C		1,05 g/cm310 gr/10min12 Kj/m2Classe HBDownload TDS
ISOTER A 10 150 HTABS with  high
heat resistance
Vicat B/50 105°C		1,05 g/cm310 gr/10min12 Kj/m2Classe HBDownload TDS
ISOTER A 5 150 HT LEABS very high
heat resistance
Vicat B/50 108°C,
low emission 		1,04 g/cm36 gr/10min18 Kj/m2Classe HBDownload TDS
ISOTER A 30 200 FR V0ABS flame retardant,
UL94 V0 1,5mm		1,04 g/cm330 gr/10min20 Kj/m2Classe VODownload TDS
Dafnelac<sup>®</sup>

Dafnelac®

Styrenic Compound with a wide melt flow rate range, impact modified and heat resistance. The products are available also glass fiber reinforced and colored with matt or high gloss surface, upon specific customer requirement. Halogen based flame retardant. UL certified.
  • Unfilled -
  • Glass Fiber Reinforced
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNELAC KEABS low flow,
high impact resistance,
suitable for extrusion
and vacuumforming		1,04 g/cm35 gr/10min25 Kj/m2Classe HBDownload TDS
DAFNELAC SN ABS medium flow,
general purposes,
good impact resistance		1,04 g/cm326 gr/10min17 Kj/m2Classe HBDownload TDS
DAFNELAC SFABS high flow,
general purpose,
good impact resistance		1,04 g/cm335 gr/10min16 Kj/m2Classe HBDownload TDS
DAFNELAC SN ACABS medium flow,
improved chemical resistance		1,04 g/cm320 gr/10min20 Kj/m2Classe HBDownload TDS
DAFNELAC TMABS medium
heat resistance
Vicat B/50 100°C		1,05 g/cm316 gr/10min12 Kj/m2Classe HBDownload TDS
DAFNELAC THABS high
heat resistance
Vicat B/50 102°C		1,05 g/cm313 gr/10min12 Kj/m2Classe HBDownload TDS
DAFNELAC TXABS very high
heat resistance
Vicat B/50 110°C		1,05 g/cm36 gr/10min11 Kj/m2Classe HBDownload TDS
DAFNELAC FXCABS flame retardant,
UL94 V0 - 5VA on 1,7mm		1,18/1,20 g/cm340 gr/10min11 Kj/m2Classe VO - SVADownload TDS
DAFNELAC FXC TABS flame retardant,
with improved
heat resistant,
UL94 V0 - 5VA on 1,7mm		1,2 g/cm325 gr/10min10 Kj/m2Classe VO - SVADownload TDS
DAFNELAC AS2/LASA medium flow
and impact resistance.
Good chemical, UV and weathering resistance		1,07 g/cm330 gr/10min10 Kj/m2Classe HBDownload TDS
DAFNELAC AS3/LTASA improved
thermal resistance,
good chemical, UV and weathering resistance		1,07 g/cm310 gr/10min12 Kj/m2Classe HBDownload TDS
DAFNELAC NRPSAN general purpose
for injection moulding, for transparent and solid colors		1,07 g/cm315 gr/10min2 Kj/m2Classe HBDownload TDS
DAFNELAC NRP P04SAN 20% glass
fiber reinforced 		1,22 g/cm39 gr/10min3 Kj/m2Classe HBDownload TDS

 

 

 

 

Isostyr<sup>®</sup>

Isostyr®

Styrenic Compound, with a wide melt flow rate range, impact modified and heat resistance. Colored upon specific customer requirement. Halogen based flame retardant. UL certified.
  • Unfilled
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
ISOSTYR A 10 50HIPS medium impact,
good heat resistance
and high stiffness		1,04 g/cm310 gr/10min5 Kj/m2Classe HBDownload TDS
ISOSTYR A 10 100 V2HIPS flame retardant
UL94 V2 1,5 mm		1,13 g/cm320 gr/10min7 Kj/m2Classe V2Download TDS
Dafnestil<sup>®</sup>

Dafnestil®

Styrenic Compound, with a wide melt flow rate range, impact modified and heat resistance. Colored upon specific customer requirement. Halogen based flame retardant. UL certified.
Technical data
NameCompound

Density

ISO 1183

MFI 

ISO 1133

Izod Notched

ISO 180/1A

Flamability

UL94

 
DAFNESTIL KUGPPS good fluidity
and good heat resistance		1,05 g/cm310 gr/10min1,7 Kj/m2Classe HBDownload TDS
DAFNESTIL AMHIPS medium impact,
good heat resistance
and high stiffness		1,04 g/cm310 gr/10min5 Kj/m2Classe HBDownload TDS
DAFNESTIL ATHIPS high impact,
heat resistant
and high stiffness		1,04 g/cm35 gr/10min6 Kj/m2Classe HBDownload TDS
DAFNESTIL AXRHIPS high impact,
flame retardant
UL94 V0 1,6mm -
GWFI 960 2,00mm		1,14/1,18 g/cm310 gr/10min6 Kj/m2Classe V0 -
GWFI 960		Download TDS
DAFNESTIL AXBHIPS high impact,
flame retardant
UL94 V2 1,6mm -
GWFI 850 1,00mm 		1,10/1,12 g/cm312 gr/10min6 Kj/m2Classe V2 -
GWFI 850		Download TDS
DAFNESTIL AXEHIPS high impact,
flame retardant
UL94 V2 - GWFI 960 1,00mm		1,17 g/cm36 gr/10min5 Kj/m2Classe V2 -
GWFI 960		Download TDS
DAFNESTIL AXFHIPS high impact,
flame retardant
UL94 V2 - GWFI 750 1,00mm		1,14/1,17 g/cm37 gr/10min5 Kj/m2Classe V2 -
GWFI 750		Download TDS
No products found.
Try to modify the search parameters again.